Honeywell VRN2AFSXB102 Pressure Independent Control Valve

Product Description

The Honeywell VRN2AFSXB102 is a pressure independent control valve designed for hydronic systems. This valve includes an electric actuator and integrates both flow and temperature control. It adjusts the flow in hydronic system circuits to maintain the desired temperature, even when piping pressures change.

• Features a 1/2 in. NPT connection and 2-way pattern.
• Equipped with stainless steel trim and supports modulating floating control.
• Operates on 24 VAC and includes a NEMA 3R enclosure.

Product Highlights

The VRN2AFSXB102 simplifies each hydronic circuit's temperature control with its automatic flow regulation features.

Product Information

Standard Information

• Brand: Honeywell
• MPN: VRN2AFSXB102

Technical Specifications

• Type: Assembly
• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1/2 in
• GPM: 4 GPM
• Control Signal: Analog, Floating
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 gpm (1/2 in valve) to 95 gpm (3 in valve)
• Close-off pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 gpm)
• Warranty: 1 year on valves, 5 years on actuators