Honeywell VRN2ADSA2001 Pressure Independent Control Valve

Product Description

The Honeywell VRN2ADSA2001 is a pressure independent control valve designed for reliable system performance. It features a half inch NPT connection and a two-way valve pattern, ensuring optimal fluid control. This valve has a maximum flow rate of two gallons per minute and is made with a durable stainless steel trim.

• Half inch NPT connection
• Two-way valve pattern
• Flow rate of two gallons per minute

Product Highlights

This valve utilizes a floating on/off control signal and includes fail-in-place functionality for safety. It comes with a one-meter cable and operates on twenty-four VAC power, making it suitable for various HVAC applications.

Product Information

Standard Information

• Brand: Honeywell
• Type: Assembly

Technical Specifications

• Connection: NPT
• Supply Voltage (Nominal): 24 VAC
• Trim Material: Stainless Steel
• Pattern: 2-way
• Size: 1/2 in
• GPM: 2 GPM
• Control Signal: Floating, Two Position
• Valve Type: Dynamic Pressure Regulated Control Valve
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: 1/2 in to 3 in with female NPT pipe fittings
• Body Pressure Rating (maximum): 360 psi (2500 kPa) at 250°F (121°C)
• Controlled Medium: Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
• Medium Temperature Range: -22°C to 250°F (-30°C to 121°C)
• Maximum Differential Pressure: 1 GPM (1/2 in valve) to 95 GPM (3 in valve)
• Close-off Pressure: 100 psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at 1/2 in or 3/4 in (DN15 ~ DN20)
• Minimum Torque Required: 35 lb-in (4 Nm) up to 3 in (DN80), 18 lb-in (2 Nm) up to 3/4 in (and 1 in up to 9 GPM)
• Warranty: 1 year on valves, 5 years on actuators