HONEYWELL VRN2ADPXB100 Pressure Independent Control Valve

Product Description

The Honeywell VRN2ADPXB100 is a pressure independent control valve equipped with an electric actuator. This valve features a one-half inch NPT connection and operates as a two-way valve. It is designed for a maximum flow rate of two gallons per minute. The valve includes plated brass trim and a DCA profile, functioning with a modulating floating control signal while being designed to fail open. It requires a twenty-four VAC supply voltage and includes one auxiliary switch.

• One-half inch NPT connection.
• Operates on a twenty-four VAC supply voltage.
• Includes one auxiliary switch for added functionality.

Product Highlights

The Honeywell VRN2ADPXB100 is suitable for controlling water or glycol solutions in various settings, ensuring optimal flow regulation.

Product Information

Standard Information

• Brand: Honeywell
• Country of Origin: US

Technical Specifications

• Manufacturer Part Number: VRN2ADPXB100
• Valve Type: Dynamic Pressure Regulated Control Valve
• Connection: NPT
• Size: One-half inch
• Pattern: Two-way
• Flow Rate: Two gallons per minute
• Control Signal: Analog, Floating
• Supply Voltage: Twenty-four VAC
• Trim Material: Stainless Steel
• Body Style: Two-way ball valve, straight-through flow, full port with patented flow control insert
• Pipe Size: One-half inch to three inches with female NPT pipe fittings
• Body Pressure Rating (maximum): Three hundred sixty psi (Two thousand five hundred kPa) at two hundred fifty degrees Fahrenheit (one hundred twenty-one degrees Celsius)
• Controlled Medium: Water or glycol solutions up to fifty percent; not suitable for combustible gases, oil, or steam
• Medium Temperature Range: Negative twenty-two degrees Celsius to two hundred fifty degrees Fahrenheit (Negative thirty degrees Celsius to one hundred twenty-one degrees Celsius)
• Maximum Differential Pressure: One gallon per minute (one-half inch valve) to ninety-five gallons per minute (three inch valve)
• Close-off Pressure: One hundred psid
• Flow Characteristics: Equal percentage with flow control insert
• Body: Forged brass (ASTM B283)
• Flow Optimizer: Laser-milled, glass-reinforced Noryl
• Trim (ball and stem): Nickel-chrome plated brass, or stainless steel
• Stem Seals: EPDM O-ring and Teflon bearings
• Ball Seals: Reinforced Teflon seals, with EPDM O-rings
• Regulator: Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
• Compatible Actuators: Non-Spring Return: ML6161, ML7161, MN6105*, MN7505*; Spring Return: MS6105, MS7505*, MS8105; MS6103, MS7503, MS8103 only at one-half inch or three-quarter inch (DN15 ~ DN20)
• Minimum Torque Required: Thirty-five lb-in (four Nm) up to three inches (DN80), eighteen lb-in (two Nm) up to three-quarter inch (and one inch up to nine gallons per minute)
• Warranty: One year on valves, five years on actuators