The Honeywell VRN262SXA102 is a pressure independent control valve designed for effective flow management. This valve features a one and one-half inch NPT connection and operates as a two-way valve with a reliable 75 GPM flow capacity. It includes stainless steel trim and supports on/off control with a fail-open configuration, ensuring dependable operation even during pressure changes.
Features a one and one-half inch NPT connection.
Designed for on/off control with a fail-open configuration.
Operates on 24 VAC and includes one auxiliary switch.
Product Highlights
This valve integrates flow and temperature control, automatically adjusting flow to maintain desired temperatures during pressure fluctuations.
Product Information
Standard Information
Brand: Honeywell
MPN: VRN262SXA102
Technical Specifications
Valve Type
Dynamic Pressure Regulated Control Valve
Connection
NPT
Size
1-1/2 inches
Pattern
2-way
Flow Rate
75 GPM
Trim Material
Stainless Steel
Input Voltage
24 VAC
Control Signal
Two Position
Enclosure
NEMA 3R
Body Style
Two-way ball valve, straight-through flow, full port with patented flow control insert
Pipe Size
1/2 inches to 3 inches with female NPT pipe fittings
Body Pressure Rating (maximum)
360 psi (2500 kPa) at 250°F (121°C)
Controlled Medium
Water or Glycol solutions up to 50%; not suitable for combustible gases, oil or steam
Medium Temperature Range
-22°C to 250°F (-30°C to 121°C)
Maximum Differential Pressure
1 GPM (1/2 inch valve) to 95 GPM (3 inch valve)
Close-off Pressure
100 psid
Flow Characteristics
Equal percentage with flow control insert
Body
Forged brass (ASTM B283)
Flow Optimizer
Laser-milled, glass-reinforced Noryl
Trim (ball and stem)
Nickel-chrome plated brass, or stainless steel
Stem Seals
EPDM O-ring and Teflon bearings
Ball Seals
Reinforced Teflon seals, with EPDM O-rings
Regulator
Hydrogenated acrylonitrile-butadiene rubber rolling diaphragm in stainless steel housing
Compatible Actuators Non-Spring Return
ML6161, ML7161, MN6105, MN7505
Compatible Actuators Spring Return
MS6105, MS7505, MS8105; MS6103, MS7503, MS8103 only at 1/2 inch or 3/4 inch
Minimum Torque Required
35 lb-in (4 Nm) up to 3 inches; 18 lb-in (2 Nm) up to 3/4 inch