Honeywell Home 5800PIR-OD2 Outdoor Wireless Pir Detector

Product Description

The Honeywell Home Intrusion 5800PIR-OD2 is an outdoor wireless dual-technology passive infrared (PIR) motion detector designed for perimeter security applications. It combines PIR sensing with a secondary detection technology to reduce false alarms caused by environmental interference such as wind, small animals, and temperature shifts. The unit transmits wirelessly to compatible Honeywell Home security panels, eliminating the need for field wiring between the sensor and the control panel. Security system installers and low-voltage alarm technicians are the primary trades for this device.

The 5800PIR-OD2 is suited for outdoor perimeter protection in both residential and light commercial installations. It is typically mounted at entry points, along building perimeters, or in locations where wired sensors are not practical. The dual-technology detection approach means both PIR and the secondary sensing channel must trigger simultaneously before an alarm signal is sent, which is a common strategy for reducing nuisance alarms in outdoor environments.

Key Features

• Dual-technology detection reduces false alarms in outdoor environments
• Wireless transmission eliminates field wiring runs to the control panel
• Passive infrared sensing detects heat signatures from moving individuals
• Designed for outdoor perimeter security applications
• Single unit quantity per package

Compatibility

Designed for use with compatible Honeywell Home wireless security systems that support the 5800-series sensor protocol. No specific panel model numbers were provided in the product data.

Installation Notes

Installation should be performed by a licensed low-voltage alarm technician familiar with local codes and the requirements of the relevant security panel. Power down or disarm the security system before adding or enrolling new wireless devices. Mount the detector at the manufacturer-recommended height and angle to maximize coverage and minimize ground clutter interference. Follow the panel programming instructions to enroll the transmitter zone before testing the detection pattern.