Honeywell Commercial Security HC70WB8R2 8MP Ir Bullet Camera

Product Description

The HONEYWELL COMMERCIAL SECURITY HC70WB8R2 is an 8-megapixel infrared IP bullet camera designed for commercial security installations. It features a motorized varifocal lens with a focal range of 3.6 to 11mm, allowing remote zoom and focus adjustment without physical access to the camera. The camera supports Power over Ethernet Plus (PoE+), drawing both power and data from a single network cable. This unit is suited for licensed security integrators and commercial installers who require high-resolution fixed surveillance coverage in indoor or outdoor applications.

This camera is deployed in commercial security systems where wide-angle to mid-range coverage is required at a single mounting point. The motorized zoom lens makes it practical for installations where post-mount focus adjustment from the network equipment closet is preferred. PoE+ support simplifies wiring runs and reduces the need for separate power supplies at each camera location. It fits into IP-based video surveillance systems managed through a compatible network video recorder or video management software platform.

Key Features

• 8-megapixel image sensor for high-resolution video capture
• Motorized varifocal lens, 3.6 to 11mm focal range, for remote zoom and focus adjustment
• Infrared illumination for low-light and no-light scene coverage
• PoE+ (IEEE 802.3at) support for single-cable power and data delivery
• Bullet-style housing suited for fixed mounting on walls, ceilings, or eaves

Compatibility

Designed for use in IP-based commercial video surveillance systems. Compatible with PoE+ network switches and NVR platforms that support the camera resolution and network video protocol used by this unit. Refer to the manufacturer data sheet for confirmed VMS and NVR compatibility.

Installation Notes

Installation should be performed by a licensed low-voltage security technician familiar with IP camera commissioning and network configuration. Verify that the PoE+ switch port delivers sufficient wattage to power the camera before completing the cable run. Mount the camera housing securely to a structural surface capable of supporting the unit, and confirm the lens field of view covers the intended coverage zone before finalizing the mount. Follow all applicable local codes for low-voltage cabling and commercial surveillance system installation.