Homewerks Worldwide Llc 068 HW11224SS 24 Inch Grab Bar

Product Description

The HOMEWERKS WORLDWIDE LLC 068 HW11224SS is a 24-inch stainless steel grab bar designed to provide a secure handhold in bathroom and wet-area applications. Built with a 1.5-inch diameter tube and a brushed stainless steel finish, it resists rust and corrosion in high-moisture environments. The bar supports up to 500 pounds and meets ADA compliance requirements, making it suitable for both residential accessibility retrofits and commercial restroom installations. Mounting hardware is included: six stainless steel screws with exposed-screw mounting for a straightforward, code-compatible install.

This grab bar is intended for installation in bathrooms, shower enclosures, locker rooms, and similar wet or humid spaces where a secure structural handhold is required. It is commonly specified in residential ADA retrofits, assisted-living facilities, and commercial restroom upgrades. The brushed stainless steel finish blends with standard fixture finishes and holds up under repeated cleaning with commercial disinfectants. Installation is performed by a licensed plumber, contractor, or qualified handyperson depending on local code requirements.

Key Features

• 24-inch length with 1.5-inch tube diameter for a confident grip
• Supports up to 500 pounds of load
• ADA compliant for accessibility applications
• Brushed stainless steel finish resists rust and corrosion
• Includes six stainless steel screws and complete mounting assembly kit
• Exposed-screw mounting for secure, inspectable fastening

Compatibility

Designed as an OEM-style replacement or new-installation grab bar for standard residential and commercial bathroom wall applications where a 24-inch ADA-compliant bar is specified.

Installation Notes

Installation must be made into wall studs or a solid blocking substrate rated to support the intended load — drywall anchors alone are not sufficient for ADA grab bar applications. Shut off water supply and ensure the wall cavity is clear before drilling into wet-area walls with tile or cement board. Follow local building codes and ADA Standards for Accessible Design for mounting height and spacing requirements. A licensed contractor or plumber should verify substrate integrity before fastening.