Homewerks 511-14-114-114B 1-1/4 in Pvc Slip Union Sch 40

Product Description

The HOMEWERKS WORLDWIDE LLC 511-14-114-114B is a Schedule 40 PVC slip union sized for 1-1/4 inch pipe. It joins two lengths of PVC pipe using solvent weld connections on both ends, creating a leak-resistant, removable union joint. Rated at 150 psi at 73 degrees F, it is built for cold water distribution systems in residential and light commercial plumbing. The slip-by-slip configuration accepts standard PVC pipe on each side and is assembled using PVC primer and solvent cement. Licensed plumbers and journeyman pipefitters are the typical installers, though the fitting is straightforward enough for experienced DIYers working on residential cold water lines.

This union is designed for cold water supply piping where a serviceable joint is needed, such as at equipment connections, cleanouts, or sections of pipe that may require future removal. The solvent weld slip design makes it compatible with standard Schedule 40 PVC cold water systems. It complies with ANSI B2.1 and ASTM D2466, confirming dimensional and material standards suitable for potable and non-potable cold water plumbing applications. Each package contains 5 unions.

Key Features

• Schedule 40 PVC construction rated at 150 psi at 73 degrees F
• Slip x slip solvent weld ends for standard 1-1/4 inch PVC pipe
• Union design allows the joint to be disassembled without cutting pipe
• Complies with ANSI B2.1 and ASTM D2466 standards
• Cold water rated — not intended for hot water or pressure steam service
• Sold in a package of 5 units

Compatibility

Designed as an OEM-style replacement fitting for standard Schedule 40 PVC cold water piping systems using 1-1/4 inch slip connections.

Installation Notes

Installation is performed by a licensed plumber following applicable IPC or local plumbing code requirements. Shut off the water supply and fully drain the line before cutting into existing pipe or disassembling the union. Apply PVC primer and solvent cement per the cement manufacturer's instructions, and allow full cure time before pressurizing the line. Do not use this fitting on hot water lines, drain-waste-vent systems under pressure, or any service outside the rated cold water pressure and temperature limits.

Technical Specifications

• Pipe Size: 1-1/4 inches
• Schedule: SCH 40
• Connection Type: Slip x Slip (Solvent Weld)
• Pressure Rating: 150 psi at 73 degrees F
• Material: PVC
• Package Quantity: 5 units
• Weight: 2.8 pounds
• Standards: ANSI B2.1, ASTM D2466

Standard Information

• Brand: HOMEWERKS WORLDWIDE LLC
• Manufacturer Part Number: 511-14-114-114B