Hillman Fasteners 48384 Fasntite Gray Ceramic Screws 2in X 8

Product Description

The HILLMAN FASTENERS 48384 is a box of 12 Fasntite Gray Ceramic exterior screws designed for demanding outdoor fastening applications. Each screw measures 2 inches in length with a No. 8 diameter and features a sharp-point tip that drives into wood and composite materials without pre-drilling. The gray ceramic coating provides corrosion resistance rated to 1,000 hours of salt spray testing, making these screws well suited for coastal, high-humidity, and exterior exposure environments. A Phillips coarse-thread drive pattern ensures solid torque transfer during installation. Contractors, carpenters, and general tradespeople reach for these when building decks, fencing, exterior trim, and other outdoor structures.

These screws are intended for exterior wood-to-wood and wood-to-composite fastening where long-term corrosion resistance is required. The coarse thread pattern grips softwoods and treated lumber effectively. The sharp point reduces splitting risk in thinner stock. With a 10-year corrosion performance claim and salt-spray-tested coating, they meet the demands of exterior applications in both residential construction and light commercial work. Sold in a box quantity of 12.

Key Features

• Gray ceramic coating rated to 1,000 hours of salt spray corrosion resistance
• 2-inch length with No. 8 diameter and coarse thread pattern
• Sharp point tip drives without pre-drilling in most softwood and treated lumber
• Phillips drive head for standard bit compatibility
• 10-year corrosion performance rating for exterior exposure
• Sold as a box of 12 screws

Compatibility

Designed as an exterior-grade fastener for wood, composite, and treated-lumber applications where a No. 8 coarse-thread Phillips screw is specified.

Installation Notes

Installation is performed by carpenters, general contractors, or experienced DIYers using a standard Phillips-tip driver bit. Use the correct driver bit size to avoid cam-out and coating damage at the drive head. When fastening pressure-treated or ACQ-treated lumber, verify that the ceramic coating meets the treated-lumber manufacturer's fastener compatibility requirements. Keep screws dry and stored in their original packaging until use to preserve the coating integrity.