Hillman Fasteners 461478 Galvanized Fence Staple 1.75in

Product Description

The HILLMAN FASTENERS 461478 is a hot dipped galvanized fence staple sold in a 1 lb box. These staples measure 1.75 inches and are designed to secure wire fencing, mesh, and similar materials to wooden posts and rails. The hot dipped galvanizing process provides a thick zinc coating that resists rust and corrosion in outdoor and high-moisture environments. Fence installers, agricultural contractors, and general tradespeople rely on this type of staple for reliable long-term holding power in exterior applications.

These fence staples are used in residential, agricultural, and commercial fencing installations. They are suited for attaching woven wire, barbed wire, chicken wire, and welded wire mesh to wood posts and boards. The 1.75 inch length provides adequate penetration depth into standard wood fence posts. Each box contains 1 lb of staples, with a package quantity of 12 boxes per case.

Key Features

• Hot dipped galvanized finish for corrosion resistance in outdoor and wet conditions
• 1.75 inch length for solid penetration into wood fence posts
• Sold in 1 lb boxes, 12 boxes per case
• Designed for wire fencing and mesh attachment applications
• Thick zinc coating from hot dip process outlasts electroplated alternatives in exterior use

Compatibility

Designed as a standard fence staple for use with woven wire, welded wire mesh, chicken wire, and similar wire fencing products installed on wood posts and rails.

Installation Notes

Fence staples of this type are typically installed using a hammer or staple driver by fence installers and general contractors. Drive staples at a slight angle across the wire strand rather than parallel to it to improve holding strength. Avoid overdriving, which can cut into wire coatings or weaken the wood fiber around the fastener. Wear appropriate eye protection when driving staples.