Hillman Fasteners 42602 Exterior Screws 1.25in X 8 75-pack

Product Description

The HILLMAN FASTENERS 42602 is a 75-pack of Fasntite gray ceramic-coated exterior wood screws sized 1.25 inches by number 8. These fasteners are engineered for outdoor applications where corrosion resistance is a primary concern. The gray ceramic coating is rated to withstand 1000 hours of salt spray testing, making them suitable for coastal and high-moisture environments. Each screw features a sharp point for fast, clean starts without pre-drilling in many softwood applications, and a coarse thread profile optimized for solid wood-to-wood or wood-to-substrate pull strength. Installation is driven by a standard Phillips head driver bit.

These exterior screws are intended for decking, fencing, siding, trim, and general outdoor wood construction. The coarse thread pattern provides strong holding power in dimensional lumber and engineered wood products. The sharp point reduces splitting at board edges, which is useful when fastening near the ends of boards. A 10-year coating performance rating makes these a dependable choice for projects where long-term weather exposure is expected. Contractors, carpenters, and experienced DIYers will find the 75-count pack practical for medium-scale jobs.

Key Features

• Gray ceramic coating rated to 1000 hours of salt spray resistance
• 10-year coating performance rating for long-term exterior use
• Sharp point design for fast starts in softwood without pre-drilling
• Coarse thread profile for strong pull-through holding power in wood
• Phillips drive head compatible with standard No. 2 Phillips bits
• 75-count pack suitable for medium-scale outdoor fastening tasks

Compatibility

Designed for general exterior wood fastening applications including decking, fencing, siding, and trim work where a number 8 coarse-thread screw at 1.25 inches length is the specified fastener.

Installation Notes

Installation is performed with a standard No. 2 Phillips bit in a cordless or corded drill-driver. Pre-drilling pilot holes is recommended near board ends or in hardwood to prevent splitting. Follow local building codes for fastener spacing and penetration depth on structural or load-bearing assemblies. Do not mix these fasteners with incompatible metals in direct contact where galvanic corrosion could be a concern.