Hillman Fasteners 42484 Wood Screws 10x3 Bronze 35 Pack

Product Description

The HILLMAN FASTENERS 42484 is a 35-pack of number 10 by 3-inch bronze-colored ceramic coat wood screws designed for exterior fastening applications. Each screw features a flat head with nibs for clean countersinking, a Type 17 point for fast starts without pre-drilling in most wood substrates, a special cross-cut thread pattern for reduced splitting, and a star drive recess for high-torque installation with minimal cam-out. The 1,000-hour ceramic coat finish provides corrosion resistance suited to outdoor exposure. These screws are installed by carpenters, general contractors, deck builders, and experienced DIYers working on exterior wood assemblies.

These screws are intended for exterior wood construction including decking, fencing, framing, and general structural fastening where moisture and weather exposure are factors. The bronze-colored ceramic coat finish blends with common pressure-treated and composite lumber tones. The Type 17 point and cross-cut thread design work together to reduce wood grain separation during drive, making them practical for dense or dry lumber. The star drive head requires a matching star bit, which improves torque transfer during installation and reduces driver slippage.

Key Features

• 1,000-hour ceramic coat corrosion resistance rated for exterior use
• Type 17 point for self-starting entry without pre-drilling in most wood
• Special cross-cut thread reduces wood splitting during drive
• Flat head with nibs for flush, clean countersinking
• Star drive recess minimizes cam-out and improves torque transfer
• 35 screws per pack, number 10 by 3-inch size

Compatibility

Designed as an OEM-style exterior wood screw for use in residential and light commercial wood construction, including decking, fencing, and framing applications where a corrosion-resistant fastener is required.

Installation Notes

Installation is performed by carpenters, deck builders, or qualified general contractors using a star drive bit matched to the screw recess. Pre-drilling a pilot hole is recommended in hardwoods or near board edges to prevent splitting, even with the Type 17 point. Follow applicable building codes for fastener spacing and penetration depth in structural applications. Do not use power tools at excessive speed, as overdriving may strip the head or damage the ceramic coat at the fastening point.