Hestan 5682 Flex Hose 3/8 Od 12 Inch Female Nut Ferrule

Product Description

The HESTAN 5682 is a flexible hose designed for gas supply connections in commercial cooking and foodservice equipment. With a 3/8-inch outer diameter and a 12-inch length, this hose provides a manageable reach between fixed gas supply points and the appliance inlet. Both ends are terminated with female fittings, each equipped with a nut and ferrule for a secure, leak-resistant connection. This part is sourced directly from Hestan and is intended for installation by licensed plumbers or qualified commercial kitchen technicians working on Hestan commercial appliances.

This flexible hose is used in commercial foodservice environments where rigid gas piping cannot accommodate direct connections due to spacing, vibration, or serviceability requirements. It fits into Hestan commercial appliance service configurations across a wide range of their product lines, including ranges, broilers, fryers, griddles, and steam equipment. The female-to-female end configuration allows connection between two male-threaded gas fittings in a straight or slightly angled run.

Key Features

• 3/8-inch outer diameter matches standard commercial appliance gas connection sizing
• 12-inch length provides adequate reach for typical appliance service connections
• Female-to-female (F-F) configuration with nut and ferrule on both ends
• Flexible construction accommodates minor misalignment and reduces vibration transmission
• OEM Hestan part for direct service and replacement use

Compatibility

Compatible with the following Hestan commercial appliance service models: HCHXX-SERVICE, HCMXXX-SERVICE, HCMXXX-SERVICE2, HCMXXX-SERVICE3, HCMXXX-SERVICE4, HCMXXX-SERVICE5, HCMXXX-SERVICE6, HFTXXX-SERVICE, HHTXXX-SERVICE, HMBXXX-SERVICE, HMGXX-SERVICE, HPGXX-SERVICE, HSBXXX-SERVICE, HSMXXX-SERVICE, HSMXXX-V1.5-SERVICE, HSPXXX-SERVICE, HSSPXXX-SERVICE, HSSXXX-SERVICE, HSTXXX-SERVICE, HSUPXXX-SERVICE, HSUXXX-SERVICE, HTGXX-SERVICE.

Installation Notes

Installation of gas supply hoses on commercial equipment must be performed by a licensed plumber or qualified gas technician in accordance with local codes and IFGC requirements. Shut off the gas supply at the main valve and verify zero pressure before disconnecting or connecting any gas hose. Inspect ferrule seats and threads for damage before assembly, and use an approved thread sealant or PTFE tape rated for gas service on all threaded joints. After installation, perform a leak test using an approved gas leak detection solution before returning the appliance to service.

Technical Specifications

• Outer Diameter: 3/8 inches
• Length: 12 inches
• End Configuration: Female to Female
• Connection Hardware: Nut and Ferrule (both ends)
• Hose Type: Flexible

Standard Information

• Brand: HESTAN
• Manufacturer Part Number: 5682