Hertel 45674603 Chucking Reamer 0.0925 in Solid Carbide

Product Description

The HERTEL 45674603 is a solid carbide chucking reamer designed to finish-ream precision holes to a nominal diameter of 0.0925 inches. Solid carbide construction provides rigidity and wear resistance needed to hold tight tolerances in hard or abrasive workpiece materials. The reamer features a straight shank for direct mounting in a drill chuck or collet and a bright polished finish that reduces friction at the cutting edge. With four right-hand flutes and a 0.5-inch flute length, this tool is suited for short, controlled cuts in production and job-shop environments. Machinists and tool-and-die technicians are the primary users.

This reamer is intended for precision hole finishing in metalworking applications where drilled holes require tight diameter tolerances and smooth surface finish. It is well suited for small-diameter work in ferrous and non-ferrous materials on CNC machining centers, knee mills, and drill presses. The compact overall length of 2 inches and straight shank design make it a practical choice for close-clearance fixtures and short-reach setups.

Key Features

• Solid carbide body for high rigidity and extended tool life in abrasive materials
• 0.0925-inch nominal reaming diameter within the 0.0500 to 0.0999 inch range class
• Four right-hand straight flutes for consistent chip control in short-depth cuts
• Bright polished finish reduces built-up edge and improves surface finish
• Straight shank compatible with standard drill chucks and ER collets
• 2-inch overall length for compact, close-clearance setups

Compatibility

Designed as a standard-tolerance chucking reamer for use in CNC machining centers, manual mills, and drill presses equipped with a drill chuck or collet capable of accepting a straight shank in this diameter class.

Installation Notes

Installation and use should be performed by a qualified machinist following applicable shop safety procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Secure the straight shank firmly in the chuck or collet to minimize runout, as runout directly affects finished hole diameter and surface finish. Always use an appropriate cutting fluid for the workpiece material to extend tool life and improve hole quality.