Hertel 2416261 Chucking Reamer 13/32 in Hss Morse Taper

Product Description

The HERTEL 2416261 is a high-speed steel (HSS) chucking reamer designed to finish-ream holes to a precise 13/32 inch (0.4062 inch decimal) diameter. With an overall length of 7 inches and a 1-3/4 inch flute length, this reamer is built for machining operations that require accurate, repeatable bore sizing in metal workpieces. The 6-flute spiral configuration with right-hand cutting and right-hand spiral delivers a smooth, consistent finish. The bright, uncoated HSS construction provides good toughness across a range of ferrous and non-ferrous materials. Machinists, tool-and-die makers, and maintenance machinists install this tool in drill presses, lathes, and machining centers.

This chucking reamer is suited for production and maintenance machining environments where hole diameter tolerances must be held tightly after drilling. The 1MT Morse taper shank fits directly into compatible machine spindles and adapter sleeves, making it a practical choice for drill press and lathe work in job shops, manufacturing facilities, and industrial maintenance settings. It is sized for through-hole and blind-hole reaming in steel, cast iron, aluminum, and similar machinable materials.

Key Features

• 13/32 inch (0.4062 inch) diameter for precise bore finishing
• 6-flute spiral design with right-hand cut for smooth material removal
• HSS tool material for toughness and general-purpose machinability
• Bright/uncoated finish — no coating to affect dimensional tolerance
• 1MT Morse taper shank for direct spindle mounting
• 7 inch overall length with 1-3/4 inch flute length

Compatibility

Designed as an OEM-style replacement or direct-use chucking reamer for machine spindles and adapter sleeves accepting a 1MT Morse taper shank.

Installation Notes

Installation is performed by qualified machinists. Power down and lock out the machine spindle before inserting or removing the reamer from the taper socket. Use a proper Morse taper drift to remove the tool — never strike the flutes or shank directly. Always pre-drill the workpiece to the appropriate pilot diameter before reaming to achieve accurate finished size.