Hertel 2415164 Chucking Reamer 1-1/4 in Hss Morse Taper

Product Description

The HERTEL 2415164 is a straight-flute chucking reamer designed for precision hole finishing in metal machining applications. Built from high-speed steel (HSS) with a bright, uncoated finish, this reamer delivers accurate, repeatable results in ferrous and non-ferrous materials. It features a 1.25-inch diameter cutting head, a 3-inch flute length, and a Morse taper shank for secure, concentric tool holding in compatible machines. With 10 right-hand cutting flutes, it produces smooth bore finishes to close tolerances. This tool is installed and used by machinists and tool-room professionals in manual mills, drill presses, and lathes.

This chucking reamer is suited for production and job-shop environments where consistent bore diameter and surface finish are required. The Morse taper shank interfaces directly with machine spindles or Morse taper sleeves, making it a practical choice for drill presses and milling machines equipped with standard taper sockets. The 11.5-inch overall length provides reach for deeper setups while maintaining rigidity. Right-hand cutting direction is standard for conventional machine spindle rotation. Typical applications include finishing pre-drilled or bored holes to final diameter in steel, cast iron, aluminum, and similar materials.

Key Features

• 1.25-inch reamer diameter for precision bore finishing
• 10 straight flutes for smooth surface finish and chip evacuation
• Morse taper shank for secure, self-locking fit in compatible spindles
• High-speed steel (HSS) construction for durability across a range of workpiece materials
• Bright, uncoated finish suitable for use with cutting fluids
• Right-hand cutting direction compatible with standard machine spindle rotation

Compatibility

Designed as an OEM-style chucking reamer for use in drill presses, lathes, and milling machines equipped with Morse taper spindles or sleeves that accommodate a 1.25-inch diameter tool.

Installation Notes

Installation and operation should be performed by qualified machinists familiar with taper-shank tooling. Power down and lock out the machine spindle before mounting or removing the reamer. Ensure the Morse taper socket and shank are clean and free of chips or debris before seating the tool. Always use appropriate cutting fluid for the workpiece material and follow machine manufacturer feed and speed recommendations.