Hertel 2296101 Chucking Reamer 1.00mm Hss Straight Shank

Product Description

The HERTEL 2296101 is a high-speed steel (HSS) chucking reamer designed for precision hole finishing in machine tool applications. With a 1.00mm diameter (0.0394 inches) and a bright, uncoated finish, this reamer delivers tight-tolerance sizing in drilled or bored holes. The straight-cylindrical shank allows secure clamping in standard drill chucks or collet holders. Four straight flutes with right-hand cutting direction provide efficient chip evacuation and consistent surface finish in a wide range of workpiece materials. The overall length of 2.5 inches and a 0.5-inch flute length make it well suited for shallow-bore finishing operations in precision machining environments.

This chucking reamer is used in CNC machining centers, manual mills, drill presses, and lathe tailstocks wherever a finished hole to 1.00mm is required. It is appropriate for production shops, toolrooms, and maintenance machining operations. The small diameter makes it particularly relevant for instrument manufacturing, electronics hardware, medical device components, and fine-tolerance fixture work. Machinists and tool-and-die professionals are the primary installers and operators of this tool.

Key Features

• 1.00mm (0.0394 inches) reamer diameter for precision hole finishing
• High-speed steel (HSS) construction for general-purpose cutting performance
• 4 straight flutes with right-hand cutting direction for smooth, consistent finish
• Straight-cylindrical shank compatible with standard chucks and collet holders
• Bright/uncoated finish suitable for use with cutting fluids across common workpiece materials
• Compact 2.5-inch overall length for use in confined or shallow-bore applications

Compatibility

Designed as a standard chucking reamer for use in any machine tool spindle accepting a straight-cylindrical shank, including drill chucks and ER collet systems sized appropriately for the shank diameter.

Installation Notes

Chucking reamers are installed and operated by machinists in machine tool spindles. Ensure the workpiece is securely fixtured and the spindle is at a controlled, appropriate feed rate and RPM for the material being reamed. Always apply cutting fluid or appropriate lubricant to extend tool life and improve surface finish. Never use a reamer to remove excessive stock — pre-drill or bore the hole to within the accepted reaming allowance before use.