Helical Solutions 00467 Square End Mill 1/2 in 2 Flute Carbide

Product Description

The HELICAL SOLUTIONS 00467 is a solid carbide square end mill engineered for aluminum cutting applications. It features a 1/2 inch mill diameter, a 1-1/4 inch length of cut, and a 45-degree helix angle that promotes efficient chip evacuation in aluminum and other non-ferrous materials. The 2-flute configuration provides generous flute volume to prevent chip packing, a common problem when machining gummy alloys at high feed rates. A Zplus coating adds lubricity and heat resistance at the cutting edge. This end mill is a single-end tool with a straight-cylindrical shank and right-hand cutting and flute direction, suitable for use in CNC machining centers and manual mills by machinists and tool-and-die professionals.

This end mill is designed for aluminum and non-ferrous material removal in shop and production environments. The 45-degree helix and 2-flute geometry are optimized for the high surface speeds and aggressive chip loads typical in aluminum roughing and finishing. It fits standard 1/2 inch collets and end mill holders. It belongs to the HELICAL SOLUTIONS End Mills for Aluminum - 2 Flute - Square - 45 deg Helix series, covering a range of common aluminum profiling, slotting, and pocketing operations.

Key Features

• Solid carbide construction for rigidity and wear resistance in aluminum cutting
• 45-degree helix angle promotes rapid chip evacuation and reduces built-up edge
• 2-flute design maximizes flute volume for high-volume aluminum chip clearance
• Zplus coating improves lubricity and extends tool life in non-ferrous applications
• Center-cutting capable, allowing plunge entry into the workpiece
• Right-hand cut, right-hand flute direction for standard spindle use

Compatibility

Designed for use in the HELICAL SOLUTIONS End Mills for Aluminum - 2 Flute - Square - 45 deg Helix series. Fits standard 1/2 inch collets and end mill holders on CNC machining centers and manual milling machines configured for right-hand spindle rotation.

Installation Notes

Installation is performed by machinists using standard collet chucks or end mill holders rated for the 1/2 inch shank diameter. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Verify runout with a dial indicator after seating to avoid premature edge wear. Follow the machine tool manufacturer and cutting tool manufacturer recommendations for speeds, feeds, and depth of cut for the specific material being machined.