Harvey Tool 987408 Engraving Cutter 45 Degree 1/8 Inch Carbide

Product Description

The HARVEY TOOL 987408 is a solid carbide engraving cutter designed for precision marking, lettering, and engraving operations on metallic workpieces. It features a 45-degree included angle with a pointed tip geometry, a 1/8 inch cutter diameter, and a 0.145 inch length of cut. With 2 right-hand flutes and an uncoated bright finish, this cutter delivers clean, accurate engraved lines in both ferrous and non-ferrous metals. The 1/8 inch shank and 1-1/2 inch overall length make it compatible with standard collet-equipped CNC routers and engraving machines used in machine shops and fabrication environments.

This engraving cutter is suited for use on ferrous metals such as steel and iron, as well as non-ferrous metals including aluminum, brass, and copper. It is a practical choice for machinists and CNC operators performing part identification, serial number engraving, decorative marking, and similar precision engraving tasks in production or job-shop settings. The pointed tip geometry at 45 degrees produces well-defined V-groove lines at standard engraving depths.

Key Features

• 45-degree included angle with pointed tip for clean V-groove engraving
• Solid carbide construction for rigidity and wear resistance in metal applications
• Uncoated bright finish suitable for both ferrous and non-ferrous metal workpieces
• 2 right-hand flutes for efficient chip evacuation during engraving passes
• 1/8 inch shank fits standard CNC collets and engraving machine spindles
• Compact 1-1/2 inch overall length minimizes deflection at depth

Compatibility

Designed for use on ferrous metals and non-ferrous metals. Fits standard 1/8 inch collet systems on CNC routers, engraving machines, and machining centers.

Installation Notes

Installation and tool changes should be performed by a qualified machinist or CNC operator with the spindle fully powered down and locked out. Secure the 1/8 inch shank firmly in a properly sized collet and verify runout before beginning a cut. Solid carbide tooling is brittle and should not be subjected to excessive side loads or interrupted cuts beyond its rated geometry. Always verify spindle speed and feed rate parameters against the material being engraved before commencing the operation.