Harvey Tool 72605-C3 Double Angle Milling Cutter 90 Degree

Product Description

The HARVEY TOOL 72605-C3 is a solid carbide double angle milling cutter designed for precision groove, chamfer, and dovetail milling operations in metalworking and machining applications. Built with a 90-degree included angle and an AlTiN coating, this cutter handles ferrous and hardened materials at elevated speeds while maintaining edge integrity. The 3/8-inch cut diameter and 1/8-inch cutting width suit tight-tolerance slotting and angular profiling work. With six teeth and a 2.5-inch overall length, it delivers consistent chip load management. Machinists and CNC operators in job shops and production environments are the primary users.

This cutter is suited for machining centers and CNC milling machines running ferrous alloys, stainless steel, titanium, and other high-temperature alloys where AlTiN coating performance is advantageous. The 3/8-inch shank diameter fits standard ER and end mill collet holders. The 1/4-inch neck diameter provides clearance for deeper angular cuts without holder interference. Typical applications include angular groove milling, chamfering, and symmetric dovetail profiles in precision component manufacturing.

Key Features

• 90-degree included angle for symmetric chamfer and dovetail milling
• AlTiN coating for extended tool life in ferrous and high-temperature alloy cutting
• Solid carbide construction for rigidity and dimensional stability
• Six-flute design for higher feed rates and improved surface finish
• 1/4-inch neck diameter provides clearance for deep angular cuts
• 3/8-inch shank diameter compatible with standard collet holders

Compatibility

Designed for use in CNC machining centers and manual milling machines equipped with a 3/8-inch collet or end mill holder. Suitable for ferrous and high-temperature alloy workpiece materials where AlTiN-coated solid carbide tooling is specified.

Installation Notes

Installation should be performed by a qualified machinist following shop safety protocols. Ensure the spindle is fully stopped and machine power is off before changing tooling. Seat the shank fully into a properly sized collet and torque the collet nut to the holder manufacturer's specification. Verify runout with a dial indicator before beginning cuts, as excessive runout accelerates edge wear on multi-flute carbide cutters.