Harvey Tool 72603 Double Angle Milling Cutter 90 Deg

Product Description

The HARVEY TOOL 72603 is a double angle milling cutter designed for producing symmetrical V-grooves, chamfers, and angular milling profiles in metalworking and machining applications. Built from solid carbide, it delivers the rigidity and wear resistance required for precise, repeatable cuts. The cutter features a 90-degree included angle, a 1/4-inch cutting diameter, and a 1/8-inch cutting width. With 4 flutes and an uncoated finish, the 72603 is suited for shops running non-ferrous metals, aluminum, brass, and similar materials where a sharp, uncoated carbide edge performs best. Overall length is 2.5 inches.

This cutter is used in CNC machining centers and manual milling setups where angular profiling, deburring, or V-groove work is required. The 1/4-inch shank diameter is compatible with standard collets and end mill holders found in most vertical milling machines and machining centers. The 1/8-inch neck diameter and 5/8-inch neck length allow for clearance in confined cutting zones. Typical users include machinists, toolmakers, and CNC programmers working in job shops, production facilities, and precision manufacturing environments.

Key Features

• 90-degree included angle for symmetrical V-groove and chamfer profiles
• Solid carbide construction for rigidity and wear resistance
• 4-flute design for smooth cutting action and chip evacuation
• Uncoated finish optimized for sharp-edge performance on non-ferrous materials
• 1/8-inch neck diameter provides clearance in tight workpiece features
• Standard 1/4-inch shank for broad collet and tool holder compatibility

Compatibility

Designed for use with standard 1/4-inch collets and end mill holders in CNC machining centers and manual vertical milling machines.

Installation Notes

Installation and tool changes must be performed by a qualified machinist with the spindle fully stopped and the machine in a locked-out state per applicable machine safety procedures. Ensure the collet or tool holder is clean and free of debris before seating the 1/4-inch shank to the correct insertion depth. Verify runout with a dial indicator after clamping to confirm concentricity before cutting. Do not exceed the cutter manufacturer recommended speeds and feeds for the workpiece material being machined.