Harvey Tool 72075 Square End Mill 0.075 in 2 Flute Carbide

Product Description

The HARVEY TOOL 72075 is a solid carbide square end mill designed for precision milling in metalworking and machining applications. With a 0.0750-inch cutting diameter, 0.225-inch length of cut, and a 1/8-inch (0.125-inch) shank diameter, this tool is built for tight-tolerance work in small-feature geometries. The 30-degree helix angle promotes efficient chip evacuation while reducing cutting forces. At 1.5 inches overall length and a bright, uncoated finish, the 72075 is a single-end, center-cutting tool suited for plunge entry as well as standard peripheral milling. It is typically installed and run by machinist professionals and CNC operators working with precision components.

This end mill is well suited for small-diameter slot milling, profiling, and light contouring in ferrous and non-ferrous materials. The 0.0750-inch diameter makes it a go-to choice for intricate part features, fine channels, and detailed pocket work where larger tooling cannot reach. The right-hand cut and right-hand flute configuration is the standard orientation for conventional CNC vertical machining centers and manual mills. It is sold and used as a direct replacement or primary tooling selection in production and job shop environments.

Key Features

• Solid carbide construction for rigidity and wear resistance in precision cuts
• 0.0750-inch cutting diameter suited for fine-feature and small-slot applications
• 30-degree helix angle promotes smooth cutting action and chip flow
• Center-cutting design allows direct plunge entry without a pre-drilled pilot hole
• Bright, uncoated finish compatible with a wide range of cutting fluid and dry-run setups
• Right-hand cut and right-hand flute for standard CNC and manual mill operation

Compatibility

Designed as a standard 1/8-inch shank solid carbide square end mill compatible with CNC machining centers, vertical mills, and rotary tool spindles accepting 0.125-inch shank tooling.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Secure the shank fully within a collet or tool holder rated for the shank diameter before operation, and verify runout with a dial indicator when tolerances are critical. Do not exceed the rated length of cut; excessive axial depth in a single pass can deflect or fracture small-diameter carbide tooling. Follow all applicable machine guarding and PPE requirements during tool changes and operation.