Harvey Tool 30410 Engraving Cutter 60 Degree 1/8 in Carbide

Product Description

The HARVEY TOOL 30410 is a solid carbide engraving cutter designed for precise material removal in engraving, marking, and detail work on ferrous and non-ferrous metals. Built with a 60-degree included angle and a pointed tip geometry, this single-flute tool produces clean, sharp V-grooves and fine engraved lines. The cutter measures 1/8 inch in diameter with a 0.108-inch length of cut and a 4-inch overall length, making it well-suited for CNC machining centers and engraving machines where reach and rigidity matter. Solid carbide construction provides the hardness and wear resistance needed for consistent performance on demanding metal substrates.

This cutter is intended for use on ferrous metals such as steel and stainless steel, as well as non-ferrous metals including aluminum, brass, and copper. Typical applications include part marking, logo engraving, serial number routing, and decorative surface work on machined components. The right-hand cutting direction and single-flute design allow for efficient chip evacuation in shallow engraving passes. It is commonly run on CNC routers, engraving machines, and VMCs by machinists and tooling technicians working in job shop and production environments.

Key Features

• 60-degree included angle with pointed tip for sharp, defined V-groove profiles
• Solid carbide construction for hardness and wear resistance on metal substrates
• Single-flute design promotes chip clearance in shallow engraving cuts
• Bright/uncoated finish suitable for ferrous and non-ferrous metal applications
• 1/8 inch shank diameter for compatibility with standard collet systems
• 4-inch overall length provides reach for engraving operations on varied workpiece geometries

Compatibility

Designed for use on ferrous metals and non-ferrous metals. Fits standard 1/8 inch collets used in CNC engraving machines, routers, and vertical machining centers.

Installation Notes

Installation and setup should be performed by a qualified machinist or CNC technician. Power down and lock out the spindle before changing tooling. Secure the shank fully in a clean, properly sized 1/8 inch collet and torque the collet nut according to the machine manufacturer's specifications. Verify runout with a dial indicator before beginning a cut, and confirm spindle speed and feed rate settings are appropriate for the workpiece material and depth of cut.