Harvey Tool 30302 Engraving Cutter 90 Degree Solid Carbide

Product Description

The HARVEY TOOL 30302 is a solid carbide engraving cutter designed for precision engraving and marking operations in metalworking applications. This single-flute tool features a 90-degree included angle with a tipped-off point geometry, producing clean, defined lines at a 0.005-inch tip diameter. The 1/8-inch cutter diameter pairs with a matching 1/8-inch shank, and the overall length is 1.5 inches. With a 0.06-inch length of cut and a bright uncoated finish, this cutter is built for shops and tool rooms requiring tight-tolerance engraving on both ferrous and non-ferrous metals. Installed by machinists and CNC operators running engraving or part-marking programs.

The 30302 is suited for engraving operations on ferrous metals such as steel and cast iron, as well as non-ferrous metals including aluminum, brass, and copper. The tipped-off point design prevents the zero-cutting-speed issue common with sharp-point engravers, making it a practical choice for CNC machining centers, engraving machines, and manual mills used in tool rooms, job shops, and production environments that require part identification, serial number marking, or decorative engraving on metal workpieces.

Key Features

• 90-degree included angle with tipped-off point for controlled line width and reduced tip wear
• 0.005-inch tip diameter for fine, precise engraving detail
• Solid carbide construction for rigidity and wear resistance in metal cutting
• Bright uncoated finish compatible with both ferrous and non-ferrous material applications
• Single-flute design promotes chip evacuation in shallow engraving passes
• 1/8-inch shank fits standard collets on CNC routers, engraving machines, and mills

Compatibility

Designed for use on ferrous metals and non-ferrous metals. Fits standard 1/8-inch collet systems on CNC machining centers and engraving machines.

Installation Notes

Installation and toolpath setup should be performed by a qualified machinist or CNC operator. Secure the 1/8-inch shank fully in the collet to the recommended grip depth before operation. Power down and lock out the machine spindle before changing or inspecting the cutter. Avoid side-loading this tool beyond its rated length of cut, as engraving cutters are not designed for lateral milling passes.