Harvey Tool 30120 Engraving Cutter 90 Degree 3/16 Inches

Product Description

The HARVEY TOOL 30120 is a solid carbide engraving cutter designed for precise material marking, engraving, and V-groove work on ferrous and non-ferrous metals. Built with a 90-degree included angle and a pointed tip geometry, this single-flute cutter produces clean, sharp lines in demanding machining environments. The 3/16-inch cutter diameter matches the 3/16-inch shank diameter, making setup straightforward on standard CNC routing and milling platforms. At 2 inches overall length with a 0.093-inch length of cut, this tool is suited for shallow engraving passes where precision and repeatability matter most. The uncoated solid carbide construction provides rigidity and wear resistance appropriate for production and job-shop use.

This cutter is intended for use on ferrous metals such as steel and iron as well as non-ferrous metals including aluminum, brass, and copper. It is commonly used by machinists and CNC operators for part marking, decorative engraving, and V-groove detail work on metal workpieces. The right-hand cutting direction is standard for conventional CNC milling setups. The compact 2-inch overall length suits both vertical machining centers and benchtop CNC mills where minimal tool stick-out is preferred.

Key Features

• 90-degree included angle with pointed tip for sharp, defined engraving lines
• Solid carbide construction for rigidity and wear resistance on metal substrates
• Single-flute design aids chip evacuation during shallow engraving passes
• Uncoated finish suitable for both ferrous and non-ferrous metal applications
• 3/16-inch cutter and shank diameter for direct collet mounting without adapters
• 2-inch overall length with 0.093-inch length of cut for controlled shallow passes

Compatibility

Designed as an OEM-style engraving cutter for use on ferrous and non-ferrous metals in CNC milling and routing applications requiring a 3/16-inch shank and 90-degree V-point geometry.

Installation Notes

Installation is performed by a qualified machinist or CNC operator. Ensure the spindle is fully powered down and at rest before inserting or removing the cutter from the collet. Confirm collet size matches the 3/16-inch shank diameter before tightening to prevent runout. Set depth of cut conservatively on initial passes to verify alignment and avoid tool deflection or workpiece damage.