Hailiang HL15-460-0222 Copper Reducing Tee 1-1/4 X 1 in

Product Description

The HAILIANG HL15-460-0222 is a copper reducing tee fitting used in pressurized plumbing systems to split or branch flow from a main run while stepping down to a smaller outlet. Sized at 1-1/4 inches by 1-1/4 inches by 1 inch with a C x C x C (sweat) connection type, this fitting accepts standard copper tubing on all three ports and is soldered in place using a torch and lead-free solder. It is a standard item in the copper fittings category, suited for both new construction and retrofit plumbing work where a reducing branch connection is required.

This fitting is used in residential and light commercial plumbing installations wherever a 1-1/4 inch main run requires a 1 inch branch takeoff. Typical applications include domestic hot and cold water distribution, recirculation lines, and hydronic heating branch piping. The sweat connection on all ports makes it compatible with standard Type L and Type M copper tubing. Licensed plumbers specify this style of reducing tee when flow must be directed from a larger trunk line to a smaller service branch without additional adapters.

Key Features

• Copper construction provides corrosion resistance and long service life in potable water systems
• C x C x C sweat connections on all three ports for soldered installation
• 1-1/4 in x 1-1/4 in x 1 in reducing configuration eliminates the need for a separate reducer fitting
• OD dimensions of 1-3/8 in x 1-3/8 in x 1-1/8 in fit standard copper tubing sizing conventions
• Suitable for both new construction rough-in and repair or retrofit plumbing work

Compatibility

Designed as an OEM-style copper sweat reducing tee for use with standard 1-1/4 inch and 1 inch copper tubing in residential and commercial plumbing systems.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the IPC. Shut off the water supply and fully drain the line before cutting or fitting any copper pipe. Clean all mating surfaces with emery cloth and apply flux before soldering; use only lead-free solder for potable water applications. Allow the joint to cool completely before restoring system pressure and inspecting for leaks.

Technical Specifications

• Material: Copper
• Product Type: Reducing Tee
• Size: 1-1/4 inches x 1-1/4 inches x 1 inch
• OD Size: 1-3/8 inches x 1-3/8 inches x 1-1/8 inches
• Connection Type: C x C x C (Sweat)
• Category: Copper Fittings

Standard Information

• Brand: HAILIANG
• Manufacturer Part Number: HL15-460-0222