Hailiang HL15-410-0306 Copper Reducer 1-1/2x1/2 Ftg X C

Product Description

The HAILIANG HL15-410-0306 is a copper fitting reducer designed for sweat-connection plumbing systems where a pipe run transitions from a larger diameter to a smaller one. The fitting end (FTG) accepts a copper pipe or tube on the larger side, while the cup end (C) receives a copper pipe on the smaller side, allowing a standard soldered joint on both connections. Sized at 1-1/2 inches by 1/2 inches, this reducer is a common component in residential and light commercial water distribution, hydronic, and mechanical piping systems. Plumbers and pipefitters install this fitting during new construction and retrofit work where flow reduction or line-size change is required.

This reducer sees regular use in residential water supply lines, HVAC hydronic piping, and commercial plumbing rough-in where a main trunk line steps down to a branch or fixture supply. The FTG x C configuration allows the fitting to be inserted directly into another fitting socket on the larger end, eliminating the need for an additional coupling and keeping the overall assembly compact. It is suited for both hot and cold water service in above-grade and in-wall installations where copper tube and soldered fittings are specified.

Key Features

• Full copper construction for corrosion resistance and compatibility with potable water systems
• FTG x C end configuration allows direct insertion into a fitting socket on the larger end
• 1-1/2 inches x 1/2 inches nominal size with OD dimensions of 1-5/8 inches x 5/8 inches
• Sweat-solder joint on both ends — compatible with standard copper tube and fittings practice
• Compact reducer profile minimizes added length in tight piping assemblies

Compatibility

Designed as an OEM-style sweat fitting for use with standard copper water tube in 1-1/2 inches and 1/2 inches nominal sizes per applicable ASME and ASTM copper tube standards.

Installation Notes

Installation is performed by licensed plumbers or qualified pipefitters using standard sweat-soldering tools including a torch, flux, and lead-free solder in compliance with local plumbing codes and ASTM B32 requirements. Shut off the water supply and fully drain the affected lines before cutting or fitting work begins. Clean all mating surfaces with emery cloth or a fitting brush and apply flux before heating to ensure a sound, leak-free joint. Do not apply excessive heat to the fitting body, as overheating can oxidize the copper and compromise the solder joint.

Technical Specifications

• Material: Copper
• Nominal Size: 1-1/2 inches x 1/2 inches
• OD Size: 1-5/8 inches x 5/8 inches
• End Connection: FTG x C (Fitting x Cup)
• Product Type: Reducer
• UPC: 68326432096

Standard Information

• Brand: HAILIANG
• Manufacturer Part Number: HL15-410-0306