Hager Hinge RC17414ANEA14 Full Mortise Hinge 4x4 Antique Nickel

Product Description

The HAGER HINGE RC17414ANEA14 is a full mortise, plain bearing hinge designed for residential door applications. It measures 4 inches x 4 inches with a 1/4-inch radius corner profile and ships in an antique nickel finish. Plain bearing construction suits standard residential door frequency, making it a straightforward replacement or new-installation choice for doors that do not require heavy-duty or ball-bearing performance. Licensed carpenters, general contractors, and door hardware installers typically specify this hinge for interior and light-duty exterior residential door sets where a classic antique nickel aesthetic is required.

This hinge is suited for residential full mortise door installations where the hinge leaf is recessed flush into both the door edge and the door frame. The antique nickel finish coordinates with period-style and transitional hardware sets. It is sold as a single unit, making it easy to order the exact quantity needed for a job. The 1/4-inch radius corner geometry matches the most common residential mortise pocket routed with standard door hinge templates.

Key Features

• Full mortise design recesses flush into door edge and frame for a clean, finished appearance
• 4 inches x 4 inches leaf size appropriate for standard residential door weights and thicknesses
• 1/4-inch radius corners match common residential door hinge routing templates
• Plain bearing construction suited to typical residential door use frequency
• Antique nickel finish for period-style and transitional interior hardware coordination
• Sold per each, allowing precise quantity ordering for single or multi-door projects

Compatibility

Designed as an OEM-style replacement or new-installation hinge for standard residential full mortise door applications requiring a 4 inches x 4 inches plain bearing hinge with a 1/4-inch radius corner profile.

Installation Notes

Installation is typically performed by a licensed carpenter or door hardware installer following standard mortise routing procedures. Confirm the existing or routed mortise pocket matches the 4 inches x 4 inches leaf size and 1/4-inch radius corner before installation. Remove the door from the frame before seating and fastening the hinge leaves to avoid misalignment. Follow applicable local building codes for door hardware fastener requirements.