Hager Hinge RC17413125EA14 Full Mortise Plain Bearing Hinge

Product Description

The HAGER HINGE RC17413125EA14 is a full mortise plain bearing hinge designed for residential door applications. Measuring 3.5 inches by 3.5 inches with a 1/4-inch radius corner, this hinge is surface-finished in antique brass for a traditional aesthetic. Full mortise construction means both hinge leaves seat flush into routed pockets in the door and frame, providing a clean, low-profile installation. Plain bearing design is appropriate for standard residential-weight doors that do not require heavy-cycle or high-frequency ratings. Weighing 0.4 pounds per unit, it is sold individually and is a practical choice for interior and light-duty exterior residential door projects.

This hinge is suited for residential new construction and renovation projects where full mortise hardware is specified. Typical applications include interior passage doors, bedroom and bathroom doors, and light-duty entry doors in single-family homes and multi-unit residential buildings. The antique brass finish integrates with traditional and transitional door hardware sets. Finish carpenters, general contractors, and door hardware installers are the primary trades handling this component during rough and finish stages of construction.

Key Features

• Full mortise design seats flush into door edge and frame for a clean, recessed appearance
• 3.5 inches x 3.5 inches leaf dimensions sized for standard residential door applications
• 1/4-inch radius corner profile for a traditional look
• Plain bearing construction appropriate for standard residential door weight and cycle frequency
• Antique brass finish for compatibility with traditional and transitional hardware sets
• Sold as a single unit (EA) for flexible quantity ordering

Compatibility

Designed as an OEM-style full mortise plain bearing hinge for standard residential door installations requiring a 3.5-inch x 3.5-inch hinge with a 1/4-inch radius corner profile.

Installation Notes

Installation is typically performed by a finish carpenter or door hardware installer using a hinge mortise chisel or router jig to cut accurate pockets in the door edge and frame jamb. Ensure the door is properly shimmed and plumb before marking hinge locations. Fasten with appropriate wood screws sized to the door and frame material. Follow applicable local building codes for door hardware specifications on rated or fire-assembly doors.