Guhring 9067740095200 Corner Chamfer End Mill 3/8 in 4 Flute

Product Description

The GUHRING 9067740095200 is a solid carbide corner chamfer end mill designed for high-performance material removal in demanding machining environments. Built to a 0.375 inch diameter with a 1.5 inch length of cut and 3.5 inch overall length, this single-end tool features four helical flutes at a 48-degree helix angle. The 0.005 inch chamfer width at a 45-degree chamfer angle provides controlled edge preparation on finished workpieces. A nano-A AlTiN PVD coating delivers heat resistance and extended tool life under aggressive cutting conditions. Licensed machinists and CNC operators working in job shops and production facilities are the primary users of this tool.

This end mill is rated for primary use in steel, stainless steel, superalloys, and titanium, and is secondarily suited to non-ferrous metals. Its centercutting geometry enables shouldering, slotting, ramp-down, helical interpolation, drill milling, and plunging and recessing operations. The extra-long length type and straight-cylindrical shank suit setups requiring extended reach into deep pockets or complex part geometries. Normal pitch and a high helix style support both roughing and finishing passes in a single tool.

Key Features

• Solid carbide construction with nano-A AlTiN PVD coating for heat and wear resistance
• 48-degree high helix angle promotes efficient chip evacuation in difficult-to-machine alloys
• Centercutting design supports plunging, ramp-down, and helical interpolation
• 0.005 inch chamfer width at 45 degrees for precise edge chamfering
• Right-hand flute direction and right-hand cutting for standard CNC spindle setups
• Chipbreaker geometry supports roughing and finishing material removal in a single tool

Compatibility

Designed for use on CNC machining centers and manual mills handling steel, stainless steel, superalloys, titanium, and non-ferrous metals. Fits standard straight-cylindrical ER or milling collet toolholders accepting a 0.375 inch shank diameter.

Installation Notes

Installation is performed by qualified machinists or CNC setup personnel. Seat the straight-cylindrical shank fully in a compatible collet or end mill holder and torque the retention mechanism to the toolholder manufacturer's specification before engaging the spindle. Verify runout with a dial indicator prior to cutting. Confirm spindle speed, feed rate, and depth of cut against the applicable material and toolholder manufacturer guidelines before beginning the operation.