Guhring 9002050182600 Jobber Drill Bit 23/32 in Hss

Product Description

The GUHRING 9002050182600 is a jobber-length twist drill bit designed for general-purpose drilling in metal fabrication and machining environments. Built from M2 high speed steel with an oxide coating, it delivers consistent performance across a range of ferrous materials. The bit measures 23/32 inches (0.7188 inches) in diameter with a 118-degree standard point angle and a web-thinned tip geometry that reduces entry force and improves chip evacuation. Overall length is 198 mm with a flute length of 135 mm. Right-hand spiral flutes and a straight-cylindrical shank make it compatible with standard drill chucks. Licensed machinists, maintenance technicians, and metalworking professionals are the primary installers of this tool.

This drill bit is suited for drilling cast iron and steel in both production and maintenance-repair-overhaul applications. The DIN 338 specification ensures dimensional consistency expected in precision machining contexts. The 5xD flute-to-diameter ratio provides adequate chip clearance for moderate-depth holes. With a maximum drilling depth of approximately 4.237 inches (107.61 mm), it handles typical through-hole and blind-hole work in plate, structural, and fabricated steel components. Series 205 construction reflects a general-purpose performance tier appropriate for a wide variety of shop and field drilling tasks.

Key Features

• M2 high speed steel construction with oxide finish for wear resistance
• 118-degree standard point angle with web-thinned tip for easier penetration
• 23/32 inches (0.7188 inches) diameter with straight-cylindrical shank for standard chuck compatibility
• DIN 338 specification for dimensional and performance consistency
• Right-hand, regular spiral flute for efficient chip removal in steel and cast iron
• Tapered web configuration for improved bit rigidity and reduced deflection

Compatibility

Designed as a general-purpose jobber-length drill bit per DIN 338 for use in standard drill chucks accepting a 23/32-inch straight-cylindrical shank. Primary workpiece materials are cast iron and steel.

Installation Notes

This drill bit is installed by machinists or maintenance technicians using a standard keyed or keyless drill chuck on a drill press, hand drill, or milling machine. Secure the shank fully in the chuck before operation and confirm the workpiece is clamped or fixtured. Use appropriate cutting fluid or coolant when drilling steel to extend tool life and reduce heat buildup. Inspect the cutting edges for wear before each use and replace if chipping or dulling is observed.