Guhring 9002050032500 Jobber Drill 3.25 Mm Hss

Product Description

The GUHRING 9002050032500 is a high speed steel jobber-length twist drill designed for general-purpose drilling in metal fabrication and machining environments. Built to DIN 338 standards, it carries a 118-degree standard point angle with web thinning for easier penetration and reduced thrust. The oxide coating provides a baseline level of lubricity and corrosion resistance during operation. At 65 mm overall length with a 36 mm flute length, this Series 205 drill covers typical jobber-depth applications. It is suited for use in drill presses, CNC machining centers, and hand-held power tools. Machinists, tool and die workers, and general metalworking tradespeople are the primary users.

This drill is optimized for cutting cast iron and steel workpieces, covering a broad range of standard production and maintenance drilling tasks. The right-hand spiral flute geometry with a regular spiral type promotes efficient chip evacuation in through-hole and blind-hole applications. The straight-cylindrical shank seats directly into standard drill chucks without requiring a collet adapter. At 3.25 mm diameter, it fits within the 3.00 mm to 4.00 mm drill size range and is a practical choice for pilot holes, clearance holes, and light-production runs where a general-purpose HSS drill is appropriate.

Key Features

• 118-degree standard point angle with web-thinned, tapered web for reduced entry thrust
• M2 high speed steel construction with oxide coating for basic wear and corrosion resistance
• Right-hand cutting, regular spiral, 2-flute design for efficient chip removal
• DIN 338 standard geometry ensures dimensional consistency and interchangeability
• Straight-cylindrical shank fits standard drill chucks without adapters
• No coolant-through requirement — compatible with conventional flood or dry drilling setups

Compatibility

Designed as a general-purpose OEM-style jobber drill suitable for standard drill chucks and tool holders accepting a 3.25 mm straight-cylindrical shank, as specified under DIN 338 Series 205.

Installation Notes

This drill is installed by machinists and metalworking tradespeople using standard drill chucks on drill presses, mills, or power hand tools. Ensure the machine is powered down and the chuck is fully secured before beginning work. Do not exceed the recommended maximum drilling depth of approximately 31 mm for this diameter. Use appropriate cutting fluid or coolant for the workpiece material to extend tool life and maintain hole quality.