Guardair F5036AQF Quiet Force Air Blow Gun 36 in

Product Description

The GUARDAIR F5036AQF is a Quiet Force air blow gun designed for industrial and shop air systems where noise reduction and high airflow performance are both required. Built with an aluminum body, this blow gun delivers 140 standard cubic feet per minute (SCFM) of airflow through a 36-inch tube with a 3/4 NPT inlet connection. The Quiet Force tip design reduces exhaust noise compared to standard open-orifice blow guns while still maintaining the airflow output needed for part clearing, chip removal, and drying operations. It is rated for continuous use between 0 degrees F and 240 degrees F, making it suitable for demanding shop environments. Technicians and maintenance professionals in manufacturing, HVAC, and mechanical trades are the primary installers and users of this tool.

The F5036AQF is well suited for production floor applications, maintenance bays, and mechanical shops where compressed air lines are already in service. The 36-inch tube length keeps the operator at a safe working distance from the workpiece and allows access to deep or confined areas. The 3/4 NPT inlet is compatible with standard shop air fittings and manifolds. This blow gun is appropriate for both light-duty and sustained-use applications where OSHA-compliant noise levels and airflow control are priorities.

Key Features

• Quiet Force tip design reduces exhaust noise compared to open-orifice blow guns
• 140 SCFM airflow output for effective chip clearing, drying, and part blowoff
• 36-inch aluminum tube for extended reach and lightweight handling
• 3/4 NPT inlet threads directly onto standard shop air fittings
• Rated from 0 degrees F to 240 degrees F for use in temperature-variable environments
• Aluminum body construction for corrosion resistance and reduced weight

Compatibility

Designed for use with standard compressed air systems equipped with 3/4 NPT outlet fittings or manifolds in industrial, shop, and mechanical service environments.

Installation Notes

This blow gun is installed by maintenance technicians, pipefitters, or qualified shop personnel onto an existing compressed air supply line. Depressurize and lock out the air supply before connecting or disconnecting the blow gun from the system. Use appropriate thread sealant on the 3/4 NPT inlet connection and verify all fittings are tight before resuming air pressure. Always direct airflow away from personnel and wear appropriate eye protection during operation, per OSHA 29 CFR 1910.242 guidelines for compressed air use.