Gree LIV24HP230V1R32AH Livo Single Zone Wall Mount Mini Split Air Handler 24000 Btu/h 230V R32 Indoor Unit

Product Description

The GREE LIV24HP230V1R32AH is the indoor air handler component of the Livo single-zone wall mount mini split heat pump system, operating on 230V with R32 refrigerant. This unit delivers 24,000 BTU/h of both cooling and heating capacity using high-efficiency DC inverter technology, which modulates compressor speed to match the load and hold precise setpoints without constant cycling. The air handler mounts on an interior wall and connects to a compatible GREE Livo outdoor condensing unit. It is installed by licensed HVAC technicians in residential and light commercial single-zone applications requiring ductless climate control.

The LIV24HP230V1R32AH is suited for single-zone residential and light commercial spaces where ducted systems are impractical or unavailable. The unit supports low ambient cooling operation down to 0 degrees F and low ambient heating operation down to -13 degrees F, making it viable in cold climates year-round. It ships as the indoor wall mount head only and pairs with the GREE LIV24HP230V1R32AO outdoor unit to form a complete system. Wi-Fi connectivity is included, and wired controller options are supported for installations that require hard-wired control rather than the included wireless remote with LCD display.

Key Features

• 24,000 BTU/h cooling and heating capacity at 230V with R32 refrigerant
• DC inverter technology for variable-speed operation and reduced energy consumption
• SEER2 up to 19.0, EER2 up to 11.9, HSPF2 up to 8.5
• Low ambient cooling to 0 degrees F and low ambient heating to -13 degrees F
• Wi-Fi included; compatible with wired controller options
• Copper tube and aluminum fin indoor coil with blue anti-corrosion fin coating, 500-hour salt spray tested
• Composite drain pan and quiet operation design

Compatibility

This indoor air handler is designed for use as a matched single-zone system with the GREE LIV24HP230V1R32AO outdoor condensing unit. AHRI Certificate 214779349 applies to this matched system. Do not pair with outdoor units outside the Livo R32 single-zone product family without verifying compatibility through GREE engineering documentation.

Installation Notes

Installation must be performed by a licensed HVAC technician holding the appropriate EPA Section 608 certification for handling R32 refrigerant. Power down the circuit at the breaker before any wiring work, and verify voltage at the disconnect before connecting the line set and control wiring. The wall mount bracket must be secured to structural framing capable of supporting the unit weight, and the refrigerant line set must be leak-tested and evacuated before charging. Consult GREE installation documentation and applicable local mechanical codes before commissioning.

Technical Specifications

• Cooling Capacity: 24,000 BTU/h
• Heating Capacity: 24,000 BTU/h
• Voltage: 230V
• Refrigerant: R32
• SEER2: Up to 19.0
• EER2: Up to 11.9
• HSPF2: Up to 8.5
• Cooling Operating Range: 0 degrees F to 118 degrees F
• Heating Operating Range: -13 degrees F to 75 degrees F
• Coil Construction: Copper tube with aluminum fin
• Fin Coating: Blue anti-corrosion, 500-hour salt spray tested
• Drain Pan: Composite
• Zone Configuration: Single zone
• Component: Indoor air handler only
• AHRI Certificate: 214779349

Standard Information

• Brand: GREE
• Manufacturer Part Number: LIV24HP230V1R32AH