Gree LIV09HP230V1R32AH Livo Wall Mount Mini Split Heat Pump Indoor Unit 9000 Btu/h 20.5 SEER2 R32 230V

Product Description

The GREE LIV09HP230V1R32AH is the indoor wall-mount unit for the Livo Gen4 single-zone mini split heat pump system, rated at 9,000 BTU/h cooling and 10,000 BTU/h heating. It operates on 208/230V power and uses R32 refrigerant with high-efficiency DC inverter technology, achieving a 20.5 SEER2 and 12.5 EER2 rating. Built-in Wi-Fi and a wireless remote with LCD display are included standard. The indoor coil uses copper tube with aluminum fins and a blue-coated fin surface that has been salt spray tested to 500 hours. Licensed HVAC technicians install this unit as part of a complete single-zone ductless system.

The LIV09HP230V1R32AH is designed for single-zone residential and light-commercial applications where ductless heating and cooling is required. It pairs with the GREE LIV09HP230V1R32AO outdoor unit to form a complete system with AHRI Certificate 214779524. The system supports low-ambient cooling down to 0 degrees F and low-ambient heating down to -13 degrees F, making it suitable for year-round use in cold climates. The indoor unit mounts on an exterior wall and connects to the outdoor unit via refrigerant lineset and low-voltage control wiring.

Key Features

• 9,000 BTU/h cooling capacity and 10,000 BTU/h heating capacity with DC inverter technology
• 20.5 SEER2 and 12.5 EER2 efficiency ratings
• R32 refrigerant with AHRI certification (Certificate No. 214779524)
• Built-in Wi-Fi and wireless remote with LCD display included; wired controller compatible
• Copper tube and aluminum fin indoor coil with blue-coated fin rated for 500-hour salt spray resistance
• Low-ambient operation: cooling to 0 degrees F, heating to -13 degrees F
• Composite drain pan included

Compatibility

The LIV09HP230V1R32AH is the indoor unit paired with the GREE LIV09HP230V1R32AO outdoor unit. It corresponds to internal model designation GWH09ATCXB-D6DNA1C and is part of the Livo R32 series lineup. It is not interchangeable with the 115V variant LIV09HP115V1R32AH.

Installation Notes

Installation must be performed by an EPA Section 608-certified HVAC technician due to the use of R32 refrigerant, which is mildly flammable (A2L classification). Power to the system must be shut off at the disconnect and breaker before any service work. The indoor unit mounts to a wall bracket on an exterior or interior wall with penetration for the refrigerant lineset, condensate drain, and control wiring; refer to the manufacturer installation manual for required linesets and clearances. Follow all applicable local mechanical codes and the manufacturer service manual during commissioning and leak testing.

Technical Specifications

• Cooling Capacity: 9,000 BTU/h
• Heating Capacity: 10,000 BTU/h
• SEER2: 20.5
• EER2: 12.5
• Voltage: 208/230V, 1-phase, 60 Hz
• Refrigerant: R32
• Unit Height: 10.84 inches
• Suction Line: 3/8 inches
• Indoor Coil: Copper tube and aluminum fin
• Fin Coating: Blue hydrophilic, 500-hour salt spray tested
• Low-Ambient Cooling Range: 0 degrees F to 118 degrees F
• Low-Ambient Heating Range: -13 degrees F to 75 degrees F
• AHRI Certificate: 214779524
• Wi-Fi: Included
• Unit Type: Indoor unit only

Standard Information

• Brand: GREE
• Manufacturer Part Number: LIV09HP230V1R32AH