Graco Inc TRU211 Trueairless Spray Tip 0.011 Orifice

Product Description

The GRACO INC TRU211 is a reversible TrueAirless spray tip designed for use with airless spray equipment in professional coating applications. It features a 0.011-inch orifice diameter and produces a 4-inch fan pattern, making it well-suited for detail work, trim, and narrow surface coverage. The reversible tip design allows the operator to clear clogs quickly by rotating the tip 180 degrees and spraying out the obstruction without disassembling the gun. This tip is built for painters, coating applicators, and finishing contractors who demand consistent atomization and reliable performance on the job.

This spray tip is appropriate for use on residential and light commercial coating projects where controlled, narrow fan patterns are needed. Typical applications include doors, window frames, trim, cabinets, fencing, and other detail surfaces where a full wide-fan tip would produce excess overspray. It is commonly used with water-based and solvent-based coatings such as latex paints, stains, and sealers. Professional painters and finishing contractors select this tip size when precision and edge control are priorities over high-volume output.

Key Features

• 0.011-inch orifice for fine atomization suited to thinner coatings and detail work
• 4-inch spray fan pattern for controlled, narrow coverage on trim and accent surfaces
• Reversible tip design allows fast, in-line clog clearing without gun disassembly
• Single-unit packaging for individual replacement or addition to tip inventory
• Lightweight at 0.07 pounds for minimal added weight at the spray gun

Compatibility

Designed as an OEM-style replacement or supplemental tip for professional airless spray systems that accept standard TrueAirless tip seat configurations.

Installation Notes

Spray tips are installed and serviced by professional painters and coating applicators. Always relieve system pressure completely before removing or installing any spray tip, following the equipment manufacturer's pressure-relief procedure. Inspect the tip seat and guard for wear or damage before installing a new tip. Follow all applicable safety guidelines for the coating material being sprayed, including solvent handling and respiratory protection requirements.