Gorilla Glue 107103 Wood Repair Compound 16 Oz

Product Description

The GORILLA GLUE 107103 is a wood repair compound designed to fill, patch, and restore damaged wood and hard surfaces. Packaged in a 16 oz tub, this natural-colored compound is used to repair splits, gouges, holes, and surface voids before finishing or painting. It delivers a coverage rate of 1 square inch per ounce and carries a low VOC content of 13 g/L, making it suitable for use in occupied or semi-enclosed work areas. Recoat dry time is 1 to 4 hours, and full cure is reached within 1 to 6 hours depending on temperature and application thickness. Contractors, carpenters, and finish trades apply this product as part of surface prep workflows.

This compound is intended for wood repair and hard surface patching applications in residential and light commercial settings. Typical use cases include filling nail holes, repairing damaged trim, patching door jambs, and prepping wood surfaces prior to paint or stain. The tub format allows easy access for tool application and makes it practical for multi-point repairs on a single job. It is well suited for finish carpenters, painters, and general contractors who need a reliable, low-VOC filler that dries predictably and accepts topcoats within a standard workday.

Key Features

• 16 oz tub format for accessible, multi-use application on job sites
• Natural color blends with raw wood for accurate finish prep
• Recoat ready in 1 to 4 hours, fully cured in 1 to 6 hours
• Low VOC content at 13 g/L for use in occupied or ventilation-limited spaces
• Coverage rate of 1 square inch per ounce supports job quantity planning

Compatibility

Designed as an OEM-style replacement compound for wood repair and hard surface patching applications where a low-VOC, fast-drying filler is required prior to paint or finish coats.

Installation Notes

Surface preparation is critical before application — remove loose material, dust, and debris from the repair area. Apply with a putty knife or flexible applicator, slightly overfilling the void to allow for shrinkage during drying. Allow full dry time before sanding flush and applying topcoats. Work in areas with adequate ventilation per applicable safety guidelines, and store the tub sealed when not in use to prevent premature drying.