Goodman azv6sa6010 5 Ton 16.2 SEER2 Inverter Heat Pump

Product Description

The Goodman azv6sa6010 is a 5-ton, 16.2 SEER2 inverter-driven split heat pump outdoor unit designed for ducted residential and light commercial HVAC systems. It operates on R-32 refrigerant and uses a variable-speed inverter compressor to modulate capacity across a wide operating range, from -10 degrees F to 70 degrees F on the heating side and 0 degrees F to 115 degrees F on the cooling side. Rated cooling capacity is 53,500 BTU/h with a rated heating capacity of 54,500 BTU/h. The unit is manufactured in the United States and carries an ISO certification. Installation is a side-discharge configuration, suited for applications where airflow direction matters for clearance or aesthetics.

This unit is intended for ducted split-system installations in residential, multi-family, and light commercial applications requiring a non-communicating outdoor heat pump. It pairs with a compatible air handler or coil to complete the refrigerant circuit. The side-discharge design accommodates installations where vertical discharge is restricted. With DOE regional compliance for all regions, the azv6sa6010 can be installed across all U.S. climate zones without restriction. HSPF2 is rated at 8.2 and EER2 at 9.0, making it a solid performer for year-round conditioning loads in mixed or cold climates.

Key Features

• Inverter-driven variable-speed compressor for modulating output and improved part-load efficiency
• 16.2 SEER2 and 8.2 HSPF2 efficiency ratings under HSVTC conditions
• R-32 refrigerant with factory charge of 118 oz and pre-charged line set up to 15 feet
• Side-discharge airflow configuration for flexible placement
• Operating range of -10 degrees F to 115 degrees F covers heating and cooling in most U.S. climates
• Manufactured in the United States with ISO certification
• DOE regional compliance for all U.S. regions

Compatibility

Designed for use in non-communicating ducted split heat pump systems. Compatible accessory and component references listed in supplier data include 130-DK-008, DACA-WB-3, DQ-P-16-100, DSEN-HAQA, KEH3P573567, KPS00601, KPS00602, KPS00603, KPS00604, and KPW5G112. No specific air handler or coil model numbers were provided; consult the equipment submittals or matchup tool to confirm indoor unit compatibility before installation.

Installation Notes

Installation should be performed by a licensed HVAC technician holding an EPA Section 608 certification, as R-32 is a mildly flammable A2L refrigerant requiring adherence to applicable local codes and manufacturer handling guidelines. Disconnect and lock out all electrical power before servicing or making refrigerant connections. Minimum circuit ampacity is 37.5 amps and maximum overcurrent protection is 40 amps; verify the circuit is sized accordingly before startup. The factory pre-charged line set covers up to 15 feet; line sets up to 100 feet horizontal or 90 feet vertical are supported with proper refrigerant adjustment per manufacturer procedures.

Technical Specifications

• Cooling Capacity (Rated): 53,500 BTU/h
• Heating Capacity (Rated): 54,500 BTU/h
• Heating Capacity (Nominal): 60,000 BTU/h
• Tonnage: 5 tons
• SEER2: 16.2
• HSPF2: 8.2
• EER2: 9.0
• COP at 47 degrees F: 3.3
• Compressor Type: Inverter (variable-speed)
• Refrigerant: R-32
• Factory Refrigerant Charge: 118 oz
• Power Voltage: 208/230 volts, 1-phase, 60 Hz
• Rated Load Amps: 30 A
• Minimum Circuit Amps: 37.5 A
• Max Overcurrent Protection: 40 A
• Cooling Operation Range: 0 degrees F to 115 degrees F (ambient)
• Heating Operation Range: -10 degrees F to 70 degrees F (ambient)
• Unit Height: 39 inches
• Unit Width: 37 inches
• Unit Depth: 12.625 inches
• Unit Weight: 179 pounds
• Sound Pressure (Cooling, High): 71 dBA
• Liquid Line Size: 3/8 inch
• Suction/Gas Line Size: 7/8 inch
• Pre-Charged Line Length: 15 feet
• Max Line Set Length (Horizontal): 100 feet
• Max Line Set Length (Vertical): 90 feet
• Discharge Configuration: Side Discharge
• Installation Type: Ducted
• Communication Type: Non-Communicating
• DOE Regional Compliance: All regions
• ISO Certified: Yes
• Country of Origin: United States
• Residential Parts Warranty (Registered): 10 years all parts, 10 years compressor
• Residential Unit Replacement Warranty (Registered): 10 years compressor
• Standard Parts Warranty (Residential): 5 years all parts
• Commercial Parts Warranty: 5 years all parts

Standard Information

• Brand: Goodman
• Manufacturer Part Number: azv6sa6010