

Ships via freight in 1-3 business days
This product weighs 163 lb each and will be shipped via LTL carrier. A lift gate option will be added free of charge for your convenience.
Secure Payments
Easy Returns
Expert Advice
Fast Shipping
The GOODMAN axv6ss4810 is a 4-ton, 16.2 SEER2-rated inverter-driven outdoor condensing unit designed for split-system residential and light-commercial air conditioning applications. It operates on R-32 refrigerant and delivers a rated cooling capacity of 45,500 BTU/h. The variable-speed inverter compressor allows the unit to modulate output rather than cycle on and off at fixed capacity, improving efficiency and comfort. Electrical requirements are 208/230 volts, single phase, 60 Hz, with a minimum circuit ampacity of 31.8 amps and a maximum overcurrent protection rating of 35 amps. Side-discharge airflow is factory configured, making it suited for installations where top discharge is not practical. Produced in the United States.
This unit is part of the AXV6SS series and is configured for side discharge, making it appropriate for tight sideyard installations and certain rooftop or pad applications where airflow direction is a design consideration. It carries DOE regional compliance for both Southeast and North regions, so it meets efficiency mandates across a broad installation footprint. The unit supports communicating thermostat integration via an Amana brand smart thermostat. Cooling operation is rated for ambient conditions from 0 degrees F to 115 degrees F, giving it a wide operational envelope for hot-climate applications. Licensed HVAC contractors performing split-system replacements or new construction installs are the primary installers of this equipment.
Designed for use in split air conditioning systems requiring a 4-ton, R-32 inverter outdoor unit with side-discharge configuration. Compatible components referenced in product data include 130-DK-008, DACA-WB-3, and KPW5G112. Consult Amana or Goodman system-matching documentation to confirm approved indoor unit and air handler pairings.
Installation must be performed by a licensed HVAC technician holding the appropriate EPA Section 608 refrigerant handling certification, as this unit uses R-32, a mildly flammable A2L refrigerant requiring specific handling procedures and compatible tooling. Disconnect and lock out all power before making electrical connections; verify supply voltage matches the 208/230-volt single-phase requirement. Follow local mechanical and electrical codes, including NEC requirements for disconnect sizing and overcurrent protection not to exceed 35 amps. Ensure the refrigerant line set does not exceed 100 feet total or 90 feet vertical rise without consulting manufacturer guidelines for additional charge.
Thanks for subscribing!
This email has been registered!