Goodman asxn3n4210 Split Ac 3.5 Ton 13.4 SEER2 R-410A

Product Description

The GOODMAN asxn3n4210 is a single-stage, cooling-only outdoor condensing unit designed for ducted residential and light-commercial split-system applications. It operates on R-410A refrigerant and delivers a rated cooling capacity of 39,500 BTU/h at a 13.4 SEER2 efficiency rating. The unit uses a scroll compressor and a flowrater expansion device, and it is produced in the United States. Installation is handled by licensed HVAC technicians as part of a matched split system requiring a compatible indoor air handler or coil. Liquid line connection is 3/8 inch and suction valve outside diameter is 7/8 inch.

The asxn3n4210 is intended for ducted forced-air cooling installations in residential, multi-family, and light-commercial settings. It is rated for operation between 55 degrees F and 125 degrees F ambient, making it appropriate for standard North American cooling climates. The unit is single-phase, 208/230-volt, 60 Hz and is sized for installations requiring approximately 3.5 nominal tons of cooling. It is not a communicating system and does not include a heating function. Component accessories listed in the supplier data include line set kits, service kits, and TXV field-conversion kits compatible with this platform.

Key Features

• 13.4 SEER2 and 11.2 EER2 cooling efficiency ratings
• Rated cooling capacity of 39,500 BTU/h with a nominal 42,000 BTU/h designation
• Single-stage scroll compressor for reliable, straightforward operation
• R-410A refrigerant with 115 oz factory charge and pre-charged line length of 15 ft
• Maximum standard line set length of 200 ft horizontal and 80 ft vertical
• Sound pressure rated at 70 dBA during cooling operation
• Produced in the United States

Compatibility

Designed for use in matched ducted split-system configurations. Compatible accessory and component references from the manufacturer include 0130R00000S, ABK-20, ASC01A, CSR-U-2, FSK01A, LAKT01, LSK02A, LSK02B, and TXV-FX-KX-5T. Confirm indoor unit and coil compatibility using manufacturer matchup documentation before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes and the manufacturer installation instructions. Disconnect and lock out all power to the system before making electrical or refrigerant connections. Refrigerant handling requires EPA Section 608 certification. Verify that the indoor coil orifice size or TXV is matched to this outdoor unit before commissioning; the indoor orifice size for this unit is 0.074 inches.

Technical Specifications

• Rated Cooling Capacity: 39,500 BTU/h
• SEER2: 13.4
• EER2: 11.2
• Compressor Type: Scroll, Single Stage
• Refrigerant Type: R-410A
• Factory Refrigerant Charge: 115 oz
• Additional Charge Rate: 0.6 lb per foot
• Pre-Charged Line Length: 15 ft
• Max Line Set Length (Horizontal): 200 ft
• Max Line Set Length (Vertical): 80 ft
• Power Voltage: 208/230 volts, 1-phase, 60 Hz
• Min Voltage: 197 volts
• Max Voltage: 253 volts
• Rated Load Amps (RLA): 17.7 A
• Compressor LRA: 110.2 A
• Max Overcurrent Protection: 40 A
• Cooling Operation Range: 55 degrees F to 125 degrees F
• Sound Pressure (Cooling): 70 dBA
• Liquid Line Size: 3/8 inch
• Suction Valve O.D.: 7/8 inch
• Indoor Orifice Size: 0.074 inch
• Expansion Device: Flowrater
• Installation Type: Ducted
• Unit Type: Outdoor
• Unit Height: 39.5 inches
• Unit Width: 29 inches
• Unit Depth: 29 inches
• Country of Origin: United States
• Residential Parts Warranty (Registered): 10 years all parts
• Residential Parts Warranty (Standard): 5 years all parts
• Commercial Parts Warranty: 5 years all parts

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: asxn3n4210