305533727.png

Goodman arvt801005cn 80 Afue 100000 Btu/h Gas Furnace

GOODMAN
Brand: GOODMAN
SKU: ARVT801005CN
Availability: In Stock

Ships via freight in 1-3 business days

%3Cp%3EEarn%20[points_amount]%20when%20you%20buy%20this%20item.%3C/p%3E
$3,676.05
$3,676.05
LTL Delivery

This product weighs 124 lb each and will be shipped via LTL carrier. A lift gate option will be added free of charge for your convenience.

HAVE A QUESTION?

Our team is ready to help!

  • Voomi Supply

    Secure Payments

  • Voomi Supply

    Easy Returns

  • Voomi Supply

    Expert Advice

  • Voomi Supply

    Fast Shipping

Product Description

The GOODMAN arvt801005cn is an 80 AFUE upflow/horizontal gas furnace designed for residential and light-commercial forced-air heating systems. Operating at 100,000 BTU/h high-fire input with 80,000 BTU/h output, it uses a two-stage gas valve and a variable-speed ECM blower motor to modulate heat delivery and airflow. At low fire, input drops to 70,000 BTU/h with 56,000 BTU/h output, reducing short-cycling and improving comfort. The 3/4 hp, 1,200 RPM blower delivers up to 1,760 cubic feet per minute at high heating speed and 1,175 cubic feet per minute at low speed. Licensed HVAC technicians install and commission this unit.

The arvt801005cn is configured for upflow or horizontal installation, making it suitable for closet, basement, utility room, or attic applications in residential construction. The unit carries an ANSI certification and ETL listing, confirming it meets established safety standards. A Non-NOx burner design is specified, which is relevant in air-quality-regulated markets. The communication-capable control board supports compatible thermostat and zoning systems. Nominal cooling coil capacity is rated at 60,000 BTU/h, accommodating up to 5 tons of matched cooling equipment.

Key Features

  • 80 AFUE two-stage operation: 100,000 BTU/h high fire, 70,000 BTU/h low fire
  • Variable-speed ECM blower motor reduces energy use and airflow noise across heating and cooling modes
  • Non-NOx burner design for use in low-emission-regulated regions
  • Communication-capable control board for integration with compatible thermostats and controls
  • ETL listed and ANSI certified to applicable safety standards
  • Single 20x25 inch filter slot; external static pressure rated at 0.5 inches water column

Compatibility

Designed for upflow and horizontal installation configurations in residential forced-air systems with nominal cooling coil capacities up to 60,000 BTU/h (5 tons). No specific compatible model numbers were provided in the product data.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with the International Fuel Gas Code (IFGC), applicable local codes, and the manufacturer installation instructions. Disconnect all electrical power and shut off the gas supply before beginning any service or installation work. The 4-inch vent diameter connection requires proper venting material rated for Category I appliances; verify vent routing and clearances before commissioning. Minimum clearance to combustible materials is 0.5 feet; confirm all clearances are met before startup.

Technical Specifications

  • AFUE: 80
  • High-Fire Input Capacity: 100,000 BTU/h
  • High-Fire Output Capacity: 80,000 BTU/h
  • Low-Fire Input Capacity: 70,000 BTU/h
  • Low-Fire Output Capacity: 56,000 BTU/h
  • Nominal Cooling Capacity: 60,000 BTU/h (5 tons)
  • Gas Valve Type: Two Stage
  • Motor Speed Type: Variable Speed ECM
  • Blower Motor Horsepower: 3/4 hp
  • Blower Motor RPM: 1,200 RPM
  • Air Flow Rate High Heating: 1,760 ft3/min
  • Air Flow Rate Low Heating: 1,175 ft3/min
  • Blower Diameter: 10 inches
  • Blower Width: 10 inches
  • Power Voltage: 115 volts, 60 Hz, 1-phase AC
  • Minimum Circuit Amps: 10.6 amps
  • Max Overcurrent Protection: 15 amps
  • Temperature Rise Range: 25-55 degrees F (high fire and low fire)
  • External Static Pressure Rated: 0.5 inches water column
  • Number of Burners: 5
  • Burner Type: Non-NOx
  • Vent Diameter: 4 inches
  • Filter Quantity: 1
  • Filter Size Minimum: 20x25 inches
  • Installation Configuration: Upflow/Horizontal
  • Unit Height: 33-3/8 inches
  • Unit Width: 21 inches
  • Unit Depth: 28 inches
  • Unit Weight: 124 pounds
  • Heat Exchanger Type: Gas
  • Certifications: ETL Listed, ANSI Certified
  • Communication Feature: Yes
  • Residential Parts Warranty (Registered): Heat Exchanger 20 Years; All Parts 10 Years
  • Residential Unit Replacement Warranty (Registered): Heat Exchanger 10 Years
  • Standard Parts Warranty Residential: Heat Exchanger 20 Years; All Parts 5 Years

Standard Information

  • Brand: GOODMAN
  • Manufacturer Part Number: arvt801005cn
305533727.png

Vendor: GOODMAN

Goodman arvt801005cn 80 Afue 100000 Btu/h Gas Furnace

$3,676.05

Vendor: GOODMAN

Goodman arvt801005cn 80 Afue 100000 Btu/h Gas Furnace

$3,676.05

Related Products

Customer Support Image

Need Support?

Call Jack and His Team