Goodman arvt800804cn 80 Afue Gas Furnace 80000 Btu/h

Product Description

The GOODMAN arvt800804cn is an 80 AFUE two-stage, variable-speed ECM upflow/horizontal gas furnace rated at 80,000 BTU/h high-fire input and 64,000 BTU/h high-fire output. It runs a 56,000 BTU/h low-fire input stage for quieter, more efficient part-load operation. The variable-speed blower motor delivers airflow from 1,090 to 1,400 cubic feet per minute across heating stages, reducing temperature swings and improving comfort. Powered at 115 volts, 60 Hz, single phase, the unit draws a minimum of 7.75 amps with a 15-amp maximum overcurrent protection rating. Licensed HVAC technicians perform installation in residential and light-commercial applications.

This furnace is configured for upflow or horizontal installation, making it suitable for basement, closet, attic, or crawlspace applications where the air handler sits above or alongside the living space. The two-stage gas valve reduces input to 56,000 BTU/h on low fire, cutting cycling and noise during mild weather. The non-NOx burner design meets low-emissions requirements in regulated markets. With a nominal cooling capacity pairing of 48,000 BTU/h (4 tons), this unit is sized to match a 4-ton cooling coil in a split system. The communication feature allows integration with compatible communicating thermostats and controls.

Key Features

• 80 AFUE efficiency with two-stage gas valve for low-fire input of 56,000 BTU/h and high-fire input of 80,000 BTU/h
• Variable-speed ECM blower motor at up to 1,200 RPM with 11-inch diameter, 10-inch wide blower wheel
• Upflow/horizontal installation configuration for flexible placement
• Non-NOx burner design for compliance in low-emissions jurisdictions
• Communication-capable for use with compatible communicating system controls
• ETL Listed and ANSI Certified
• Temperature rise range of 25-55 degrees F on high fire and 20-50 degrees F on low fire

Compatibility

Designed as an OEM upflow/horizontal gas furnace for pairing with a 4-ton (48,000 BTU/h nominal) cooling coil in a split-system configuration. Specific compatible coil and air handler model numbers were not provided in the product data; consult the manufacturer documentation to confirm matched-system pairings.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the National Fuel Gas Code (NFPA 54/ANSI Z223.1), and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power before servicing or connecting the unit. Maintain a minimum 1-foot clearance to combustible materials on all applicable sides as specified. The 4-inch vent diameter connection requires a properly sized venting system; verify vent material compatibility and local code requirements before installation.

Technical Specifications

• AFUE: 80
• High-Fire Input Capacity: 80,000 BTU/h
• High-Fire Output Capacity: 64,000 BTU/h
• Low-Fire Input Capacity: 56,000 BTU/h
• Low-Fire Output Capacity: 44,800 BTU/h
• Nominal Cooling Capacity Pairing: 48,000 BTU/h (4 tons)
• Gas Valve Type: Two Stage
• Motor Speed Type: Variable Speed ECM
• Blower Motor Horsepower: 1/2 hp
• Blower Motor RPM: 1,200 RPM
• Blower Diameter: 11 inches
• Blower Width: 10 inches
• Air Flow Rate High Fire: 1,400 ft3/min
• Air Flow Rate Low Fire: 1,090 ft3/min
• Temperature Rise Range High Fire: 25-55 degrees F
• Temperature Rise Range Low Fire: 20-50 degrees F
• Power Voltage: 115 volts
• Power Frequency: 60 Hz
• Power Phase: 1 Ph
• Minimum Circuit Amps: 7.75 amps
• Max Overcurrent Protection: 15 amps
• External Static Pressure Rated: 0.5 inches water column
• Number of Burners: 4
• Burner Type: Non-NOx
• Vent Diameter: 4 inches
• Minimum Filter Size: 16 x 25 inches
• Installation Configuration: Upflow/Horizontal
• Unit Height: 33-3/8 inches
• Unit Width: 21 inches
• Unit Depth: 28 inches
• Unit Weight: 118 pounds
• Minimum Clearance to Combustibles: 1 foot
• Heat Exchanger Type: Gas
• Communication Feature: Yes
• Current Type: AC
• Unit Type: Indoor
• ETL Listed: Yes
• ANSI Certified: Yes
• Residential Registered Parts Warranty: All Parts - 10 Years; Heat Exchanger - 20 Years
• Residential Standard Parts Warranty: All Parts - 5 Years; Heat Exchanger - 20 Years
• Residential Registered Unit Replacement Warranty: Heat Exchanger - 10 Years
• Commercial Registered Parts Warranty: All Parts - 5 Years; Heat Exchanger - 20 Years
• Multi-Family Registered Parts Warranty: All Parts - 10 Years; Heat Exchanger - 20 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: arvt800804cn