Goodman ar9t961205dn 96 Afue 120000 Btu/h Gas Furnace

Product Description

The GOODMAN ar9t961205dn is a 96 AFUE, two-stage, multi-speed ECM gas furnace designed for upflow and horizontal ducted installations. It delivers 120,000 BTU/h input capacity at high fire with a rated output of 115,200 BTU/h, making it suited for larger residential or light-commercial loads up to 5 tons of cooling coil compatibility. The two-stage gas valve and multi-speed ECM blower motor work together to match heating demand, reducing short-cycling and improving comfort. Licensed HVAC technicians install and commission this unit. It carries ENERGY STAR certification and ANSI certification, and is manufactured in the United States.

This furnace is configured for upflow or horizontal installation in ducted residential and multi-family systems requiring high-efficiency gas heat. The AR9T96 series is built for applications where 96% AFUE efficiency is required to meet local energy codes or utility program requirements. The Non-NOx burner design supports installation in low-emissions jurisdictions. At 5-ton nominal cooling capacity, the unit accommodates a matched cooling coil for year-round comfort systems. High-fire airflow reaches 2,110 cubic feet per minute, with low-fire airflow at 1,666 cubic feet per minute, supporting a wide range of duct system designs.

Key Features

• 96 AFUE two-stage heating: high-fire input 120,000 BTU/h, low-fire input 84,000 BTU/h
• Multi-speed ECM blower motor with 11-inch blower diameter for efficient airflow management
• Upflow and horizontal installation configurations supported
• Non-NOx burner design for low-emissions compliance
• ENERGY STAR certified and ANSI certified
• Manufactured in the United States

Compatibility

Designed for ducted upflow and horizontal residential and multi-family gas furnace applications. Compatible with 5-ton nominal cooling coil systems. Consult Amana or Goodman coil compatibility documentation to confirm matched indoor coil selection before ordering.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with the National Fuel Gas Code (NFPA 54 / ANSI Z223.1), applicable local mechanical codes, and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power before beginning any installation or service work. Minimum circuit ampacity is 14.3 amps with a maximum overcurrent protection of 25 amps at 115 volts, 60 Hz, single phase — verify electrical service before connection. Flue venting must be sized and installed per the appliance category and local authority having jurisdiction requirements.

Technical Specifications

• AFUE: 96%
• High-Fire Input Capacity: 120,000 BTU/h
• High-Fire Output Capacity: 115,200 BTU/h
• Low-Fire Input Capacity: 84,000 BTU/h
• Low-Fire Output Capacity: 80,640 BTU/h
• Nominal Cooling Capacity: 60,000 BTU/h (5 ton)
• Power Voltage: 115 volts
• Power Phase: 1-phase
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 14.3 amps
• Max Overcurrent Protection: 25 amps
• Blower Motor Type: Multi-Speed ECM
• Blower Motor Horsepower: 1 metric hp
• Blower Diameter: 11 inches
• Air Flow Rate High Fire: 2,110 ft3/min
• Air Flow Rate Low Fire: 1,666 ft3/min
• Temperature Rise Range High Fire: 35-65 degrees F
• Temperature Rise Range Low Fire: 25-55 degrees F
• Gas Valve Type: Two-Stage
• Installation Configuration: Upflow/Horizontal
• Unit Height: 34.5 inches
• Unit Width: 24.5 inches
• Unit Depth: 28.875 inches
• Unit Weight: 154 pounds
• Burner Type: Non-NOx
• Heat Exchanger Type: Gas
• Current Type: AC
• Country of Origin: United States
• ENERGY STAR Certified: Yes
• ANSI Certified: Yes
• Registered Residential Parts Warranty: Heat Exchanger - 20 Years; All Parts - 10 Years
• Standard Residential Parts Warranty: Heat Exchanger - 20 Years; All Parts - 5 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: ar9t961205dn