Goodman ar9t960803bn 96 Afue Gas Furnace 80000 Btu/h

Product Description

The Goodman ar9t960803bn is a 96 AFUE two-stage, multi-speed upflow and horizontal gas furnace rated at 80,000 BTU/h high-fire input capacity. Built for ducted residential and light-commercial installations, it delivers 76,800 BTU/h at high-fire output and steps down to 56,000 BTU/h low-fire input for more efficient part-load operation. The unit runs on a multi-speed ECM-style blower motor at 0.5 hp and is designed for single-phase, 115-volt, 60 Hz power. Licensed HVAC technicians install and commission this furnace as part of a ducted forced-air system. ENERGY STAR certified and ANSI certified, it meets current efficiency and safety standards for residential installations.

This furnace is configured for upflow or horizontal installation in ducted forced-air systems. The two-stage gas valve allows the unit to run at reduced capacity during moderate heating loads, improving comfort and efficiency. With a nominal 3-ton cooling coil capacity of 36,000 BTU/h, it is sized to pair with a matched cooling system in typical residential applications. The Non-NOx burner design meets low-emissions requirements in markets where nitrogen oxide output is regulated. It is produced in the United States and carries ENERGY STAR certification, making it eligible for applicable efficiency incentive programs.

Key Features

• 96 AFUE efficiency rating with ENERGY STAR certification
• Two-stage gas valve for improved comfort and part-load efficiency
• Multi-speed blower motor at 0.5 hp supports variable airflow between 1,169 and 1,385 ft3/min in heating mode
• Upflow and horizontal installation configurations supported
• Non-NOx burner design for low-emissions compliance
• ANSI certified; produced in the United States

Compatibility

Designed for use in ducted residential forced-air heating systems as part of the Amana AR9T96 series. Nominal cooling coil compatibility is rated at 3 tons (36,000 BTU/h). Consult Amana/Goodman system matching guides to confirm coil and air handler pairings before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes and the International Fuel Gas Code (IFGC). Disconnect and lock out electrical power and shut off the gas supply before servicing or installing this unit. Verify that the duct system, flue venting, and gas line sizing meet the manufacturer specifications and local code requirements before startup. Do not attempt to modify the gas valve, heat exchanger, or combustion components.

Technical Specifications

• AFUE: 96%
• High-Fire Input Capacity: 80,000 BTU/h
• High-Fire Output Capacity: 76,800 BTU/h
• Low-Fire Input Capacity: 56,000 BTU/h
• Low-Fire Output Capacity: 53,760 BTU/h
• Nominal Cooling Capacity: 36,000 BTU/h (3 ton)
• Power Voltage: 115 volts
• Power Phase: 1 phase
• Power Frequency: 60 Hz
• Min. Circuit Amps: 7.7 amps
• Max Overcurrent Protection: 15 amps
• Blower Motor Horsepower: 0.5 hp
• Motor Speed Type: Multi-Speed
• Gas Valve Type: Two Stage
• Air Flow Rate High Heating: 1,385 ft3/min
• Air Flow Rate Low Heating: 1,169 ft3/min
• Temperature Rise Range High Fire: 35-65 degrees F
• Temperature Rise Range Low Fire: 25-55 degrees F
• Installation Configuration: Upflow/Horizontal
• Unit Height: 34.5 inches
• Unit Width: 17.5 inches
• Unit Depth: 28.875 inches
• Blower Diameter: 11 inches
• Blower Width: 8 inches
• Weight: 118 pounds
• Burner Type: Non-NOx
• Heat Exchanger Type: Gas
• Current Type: AC
• Unit Type: Indoor
• Installation Type: Ducted
• ENERGY STAR Certified: Yes
• ANSI Certified: Yes
• Country of Origin: United States
• Standard Parts Warranty (Residential): Heat Exchanger - 20 Years Parts; All Parts - 5 Years Parts
• Registered Parts Warranty (Residential): Heat Exchanger - 20 Years Parts; All Parts - 10 Years Parts

Standard Information

• Brand: Goodman
• Manufacturer Part Number: ar9t960803bn