Goodman ar9t960603bn 96 Afue Gas Furnace 60000 Btu/h

Product Description

The GOODMAN ar9t960603bn is a 96 AFUE natural gas furnace built for upflow and horizontal installations in ducted residential and light-commercial systems. It delivers 60,000 BTU/h at high fire with a two-stage gas valve that steps down to 42,000 BTU/h at low fire, allowing the system to match heating demand and reduce short-cycling. Airflow is handled by a multi-speed ECM blower motor rated at 0.5 horsepower, producing up to 1,083 CFM at high speed. The unit is ENERGY STAR certified and manufactured in the United States. Licensed HVAC technicians are the intended installers for this product.

This furnace is sized for a nominal 3-ton cooling coil and is intended for ducted forced-air systems in upflow or horizontal configurations. The single-phase, 115-volt power supply and compact footprint make it a practical fit for utility closets, alcoves, and attic horizontal applications where space is a constraint. The Non-NOx burner design meets low-emission requirements applicable in regulated markets. The unit carries ANSI certification and is produced domestically under the Amana AR9T96 series.

Key Features

• 96 AFUE two-stage gas furnace with high-fire input of 60,000 BTU/h and low-fire input of 42,000 BTU/h
• Multi-speed ECM blower motor provides up to 1,083 CFM at high-fire heating airflow
• Upflow and horizontal installation configurations supported in a single unit
• ENERGY STAR certified and ANSI certified
• Non-NOx burner for compliance in low-emission markets
• Manufactured in the United States under the Amana AR9T96 series

Compatibility

Designed for use with 3-ton nominal cooling coils in ducted upflow or horizontal forced-air systems. Compatible coil and accessory selection should follow the Amana AR9T96 series application guidelines. No additional specific compatible model numbers were provided in the product data.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, NFPA 54, and the manufacturer installation instructions. Disconnect all electrical power and shut off the gas supply before beginning any service or installation work. The unit requires a dedicated 115-volt AC circuit with a maximum overcurrent protection of 15 amps and a minimum circuit ampacity of 7.7 amps. Do not exceed the rated temperature rise ranges: 30 to 60 degrees F at high fire and 25 to 55 degrees F at low fire.

Technical Specifications

• AFUE: 96%
• High-Fire Input Capacity: 60,000 BTU/h
• High-Fire Output Capacity: 58,200 BTU/h
• Low-Fire Input Capacity: 42,000 BTU/h
• Low-Fire Output Capacity: 40,740 BTU/h
• Nominal Cooling Capacity: 36,000 BTU/h (3 Ton)
• Temperature Rise Range High Fire: 30-60 degrees F
• Temperature Rise Range Low Fire: 25-55 degrees F
• Airflow High Fire Heating: 1,083 ft3/min
• Airflow Low Fire Heating: 864 ft3/min
• Power Voltage: 115 volts AC, 1-phase, 60 Hz
• Max Overcurrent Protection: 15 amps
• Min Circuit Amps: 7.7 amps
• Blower Motor Horsepower: 0.5 hp
• Blower Diameter: 11 inches
• Blower Width: 8 inches
• Unit Height: 34.5 inches
• Unit Width: 17.5 inches
• Unit Depth: 28.875 inches
• Unit Weight: 1,105 pounds
• Installation Configuration: Upflow/Horizontal
• Gas Valve Type: Two Stage
• Motor Speed Type: Multi-Speed ECM
• Heat Exchanger Type: Gas
• Burner Type: Non-NOx
• ENERGY STAR Certified: Yes
• ANSI Certified: Yes
• Country of Origin: United States
• Residential Parts Warranty (Registered): All Parts 10 Years; Heat Exchanger 20 Years
• Commercial Parts Warranty (Registered): All Parts 5 Years; Heat Exchanger 20 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: ar9t960603bn