Goodman ar9t800603bn 60000 Btu/h 80 Afue Gas Furnace

Product Description

The GOODMAN ar9t800603bn is an 80 AFUE two-stage gas furnace built for upflow and horizontal ducted installations. Rated at 60,000 BTU/h high-fire input with a 48,000 BTU/h high-fire output, this unit operates at 80 percent annual fuel utilization efficiency. It uses a multi-speed ECM blower motor running at 115 volts, 60 Hz, single phase, drawing a minimum of 8.7 amps. The two-stage gas valve enables a low-fire input of 42,000 BTU/h, reducing temperature swings and improving comfort in variable-load conditions. Licensed HVAC technicians install this furnace as a central heating system component in ducted residential and light commercial applications.

This furnace is designed for upflow or horizontal ducted installations where a nominal 3-ton cooling coil is paired downstream. The unit cabinet measures 17.5 inches wide, 28 inches deep, and 33.375 inches tall, fitting standard 17.5-inch air handler openings. The Non-NOx burner configuration meets low-emissions requirements in applicable jurisdictions. A 10-inch by 8-inch blower assembly delivers up to 1,412.5 cubic feet per minute of airflow at high heat, supporting balanced airflow across typical residential duct systems.

Key Features

• 80 AFUE rated efficiency with two-stage gas valve for low-fire (42,000 BTU/h) and high-fire (60,000 BTU/h) operation
• Multi-speed ECM blower motor rated at 1/2 hp for quiet, efficient air delivery
• Upflow and horizontal installation configurations supported
• Non-NOx burner design meets low-emissions standards in qualifying markets
• ANSI certified unit with gas heat exchanger construction
• High-fire temperature rise range of 15 to 45 degrees F for broad duct system compatibility

Compatibility

Designed for upflow and horizontal ducted gas furnace installations with a nominal 3-ton cooling capacity. Cabinet width of 17.5 inches is compatible with standard coil cabinets and air handler platforms sized for that dimension. Specific compatible coil and air handler model numbers should be confirmed against the current Goodman or Amana product matching guides before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the National Fuel Gas Code (NFPA 54), and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power at the breaker before any service or connection work. Maximum overcurrent protection is 15 amps; verify the branch circuit is correctly sized before energizing. Do not exceed the published temperature rise range, and confirm duct static pressure is within design limits before commissioning.

Technical Specifications

• AFUE: 80
• High-Fire Input Capacity: 60,000 BTU/h
• High-Fire Output Capacity: 48,000 BTU/h
• Low-Fire Input Capacity: 42,000 BTU/h
• Low-Fire Output Capacity: 33,600 BTU/h
• Cooling Capacity (Nominal): 36,000 BTU/h (3 ton)
• Gas Valve Type: Two Stage
• Motor Speed Type: Multi-Speed ECM
• Blower Motor Horsepower: 1/2 hp
• Airflow Rate (High, Heating): 1,412.5 ft3/min
• Temperature Rise Range (High Fire): 15 to 45 degrees F
• Power Voltage: 115 volts AC, 60 Hz, 1-phase
• Minimum Circuit Amps: 8.7 amps
• Max Overcurrent Protection: 15 amps
• Installation Configuration: Upflow / Horizontal
• Burner Type: Non-NOx
• Heat Exchanger Type: Gas
• Unit Width: 17.5 inches
• Unit Depth: 28 inches
• Unit Height: 33.375 inches
• Blower Diameter: 10 inches
• Blower Width: 8 inches
• Unit Weight: 107 pounds
• ANSI Certified: Yes
• Standard Parts Warranty (Residential): All parts 5 years; heat exchanger 20 years
• Registered Parts Warranty (Residential): All parts 10 years; heat exchanger 20 years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: ar9t800603bn