Goodman ar9s961005cn 96 Afue 100000 Btu/h Gas Furnace

Product Description

The GOODMAN ar9s961005cn is a 96 AFUE single-stage, multi-speed ECM gas furnace designed for upflow and horizontal ducted installations. Rated at 100,000 BTU/h high-fire input with a high-fire output capacity of 96,100 BTU/h, this unit delivers efficient heating performance for residential and light-commercial applications. Operating on 115 volts AC at 60 Hz single-phase power, it draws a minimum of 16.7 amps with a maximum overcurrent protection of 25 amps. The unit is ENERGY STAR certified and ANSI certified, and is produced in the United States. Licensed HVAC technicians handle installation, typically as part of a forced-air ducted system replacement or new construction project.

This furnace is suited for residential upflow or horizontal ducted installations where a 5-ton nominal cooling capacity match is required. The unit cabinet measures 21 inches wide, making it compatible with standard 21-inch furnace applications. The 11-inch blower with a 10-inch blower width delivers a high airflow rate of 1,929 cubic feet per minute in heating mode, supporting whole-home air distribution in larger residential systems. The non-NOx burner type makes it appropriate for installations in low-emissions regions. ENERGY STAR certification supports compliance with energy-efficiency program requirements.

Key Features

• 96 AFUE efficiency rating with ENERGY STAR certification
• 100,000 BTU/h high-fire input, 96,100 BTU/h high-fire output capacity
• Multi-speed ECM blower motor rated at 1 hp delivering up to 1,929 CFM
• Single-stage gas valve for straightforward installation and control
• Non-NOx burner design for low-emissions compliance
• Upflow and horizontal installation configuration supported
• ANSI certified; produced in the United States

Compatibility

Part of the AR9S96 series. Designed for ducted upflow or horizontal installations requiring a 21-inch-wide cabinet and 5-ton nominal cooling capacity pairing. No additional specific model compatibility data was provided in the product input.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the National Fuel Gas Code (NFPA 54), and the manufacturer installation instructions. Disconnect and lock out all electrical power and shut off the gas supply at the service valve before beginning any work. Verify that the flue venting system, gas line sizing, and electrical circuit are properly sized for this unit prior to startup. Do not operate the furnace without all panels and covers secured and the venting system fully connected and inspected.

Technical Specifications

• AFUE: 96%
• High-Fire Input Capacity: 100,000 BTU/h
• High-Fire Output Capacity: 96,100 BTU/h
• Nominal Cooling Capacity: 60,000 BTU/h (5 ton)
• Power Voltage: 115 volts AC
• Power Phase: 1-phase
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 16.7 amps
• Max Overcurrent Protection: 25 amps
• Airflow Rate (High, Heating): 1,929 CFM
• Blower Motor Horsepower: 1 hp (multi-speed ECM)
• Blower Diameter: 11 inches
• Blower Width: 10 inches
• Temperature Rise Range (High Fire): 30-60 degrees F
• Gas Valve Type: Single Stage
• Motor Speed Type: Multi-Speed
• Burner Type: Non-NOx
• Installation Configuration: Upflow/Horizontal
• Unit Width: 21 inches
• Unit Height: 34.5 inches
• Unit Depth: 28.875 inches
• Unit Weight: 140 pounds
• Heat Exchanger Type: Gas
• Current Type: AC
• ENERGY STAR Certified: Yes
• ANSI Certified: Yes
• Country of Origin: United States
• Standard Parts Warranty (Residential): All Parts - 5 Years; Heat Exchanger - 20 Years
• Registered Parts Warranty (Residential): All Parts - 10 Years; Heat Exchanger - 20 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: ar9s961005cn