Goodman am9s801205dx 80 Afue Gas Furnace 120000 Btu/h

Product Description

The GOODMAN am9s801205dx is an 80 AFUE single-stage, multi-speed gas furnace designed for upflow and horizontal ducted installations. Rated at 120,000 BTU/h high-fire input and 96,000 BTU/h output, it delivers dependable forced-air heating in residential and light-commercial applications. The unit runs on a multi-speed ECM blower motor rated at 1 horsepower, providing up to 1,583 cubic feet per minute of airflow at high-fire heating mode. Low NOx burners keep combustion emissions in check. Licensed HVAC technicians handle installation and commissioning of this equipment.

The am9s801205dx is suited for ducted upflow or horizontal configurations in residential new construction and replacement applications. With a 5-ton nominal cooling capacity matching at 60,000 BTU/h, it is sized to work alongside a matching split-system cooling coil in a full comfort system. The temperature rise range at high fire runs 40 to 70 degrees F, keeping duct design within standard residential parameters. Compatible accessory references from the manufacturer include AFE18-60A, HANG20, LPLP03, LPT-03, and MVK-02.

Key Features

• 80 AFUE efficiency rating for cost-effective operation in mild to moderate climate zones
• 120,000 BTU/h high-fire input with 96,000 BTU/h output capacity
• Multi-speed ECM blower motor at 1 horsepower supporting up to 1,583 CFM airflow
• Single-stage gas valve for straightforward control and reliable ignition sequencing
• Low NOx burner design meets low-emissions requirements in applicable jurisdictions
• Upflow and horizontal installation configurations supported in a single cabinet
• Manufactured in the United States

Compatibility

Designed for ducted upflow and horizontal split-system installations with a nominal 5-ton cooling capacity. Manufacturer-listed compatible accessories include AFE18-60A, HANG20, LPLP03, LPT-03, and MVK-02. Verify coil and air handler compatibility using current manufacturer selection guides before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the National Fuel Gas Code (NFPA 54), and the appliance installation instructions. Disconnect and lock out electrical power and shut off the gas supply at the service valve before any service or installation work. Verify that the supply voltage, circuit ampacity, and overcurrent protection match the unit nameplate requirements before energizing. Do not exceed the maximum overcurrent protection rating of 20 amps.

Technical Specifications

• AFUE: 80
• High-Fire Input Capacity: 120,000 BTU/h
• High-Fire Output Capacity: 96,000 BTU/h
• Nominal Cooling Capacity: 60,000 BTU/h (5 Ton)
• Temperature Rise Range (High Fire): 40 to 70 degrees F
• Power Voltage: 115 volts
• Power Phase: Single Phase
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 15.3 amps
• Maximum Overcurrent Protection: 20 amps
• Blower Motor Horsepower: 1 hp
• Motor Speed Type: Multi-Speed ECM
• Air Flow Rate (High, Heating): 1,583 CFM
• Blower Diameter: 11 inches
• Blower Width: 10 inches
• Unit Width: 24.5 inches
• Unit Height: 33.375 inches
• Unit Depth: 28 inches
• Unit Weight: 132 pounds
• Gas Valve Type: Single Stage
• Burner Type: Low NOx
• Heat Exchanger Type: Air Cooled
• Installation Configuration: Upflow / Horizontal
• Installation Type: Ducted Indoor
• Standard Parts Warranty (Residential): All Parts 5 Years; Heat Exchanger 20 Years
• Registered Parts Warranty (Residential): All Parts 10 Years; Heat Exchanger 79 Years
• Country of Origin: United States

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: am9s801205dx