Goodman am9s800603ax 80 Afue Gas Furnace 60000 Btu/h

Product Description

The GOODMAN am9s800603ax is a single-stage, upflow/horizontal gas furnace rated at 80 AFUE, designed for ducted residential and light-commercial heating systems. It delivers a high-fire input capacity of 60,000 BTU/h and a high-fire output of 48,000 BTU/h, making it suitable for mid-size applications up to 3 nominal tons of matched cooling. The unit runs on a multi-speed ECM blower motor at 1/2 hp, which reduces electrical draw compared to a PSC motor and allows the air handler to stage airflow across heating and cooling modes. Installation is upflow or horizontal, and the furnace is manufactured in the United States with a Low NOx burner configuration.

This furnace is intended for ducted indoor installations in residential, multi-family, and light-commercial settings. The upflow/horizontal configuration makes it adaptable for basement, closet, utility room, or attic installations where the air distribution layout suits either orientation. It is matched to cooling equipment with a nominal cooling capacity of 36,000 BTU/h. Licensed HVAC technicians handle installation, startup, and commissioning. The unit operates on single-phase, 115-volt, 60 Hz power and requires a minimum circuit ampacity of 8.7 amps with a maximum overcurrent protection of 15 amps.

Key Features

• 80 AFUE efficiency rating with single-stage gas valve operation
• Multi-speed ECM blower motor for reduced electrical consumption and flexible airflow staging
• Low NOx burner design for reduced nitrogen oxide emissions
• Upflow and horizontal installation configurations supported
• Air-cooled heat exchanger with a temperature rise range of 20 to 50 degrees F at high fire
• Manufactured in the United States

Compatibility

Designed for ducted upflow or horizontal installations matched to 3-nominal-ton cooling equipment with a nominal cooling capacity of 36,000 BTU/h. Verify electrical service, gas supply type, and duct configuration before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with applicable local codes, the National Fuel Gas Code (NFPA 54/ANSI Z223.1), and the manufacturer instructions supplied with the unit. Shut off gas supply and disconnect electrical power before any service work. Verify that the electrical circuit meets the minimum circuit ampacity and maximum overcurrent protection ratings listed on the unit nameplate. Do not attempt to convert gas type or alter burner configuration without the appropriate factory-approved kit and qualified personnel.

Technical Specifications

• AFUE: 80%
• High-Fire Input Capacity: 60,000 BTU/h
• High-Fire Output Capacity: 48,000 BTU/h
• Nominal Cooling Capacity: 36,000 BTU/h
• Gas Valve Type: Single Stage
• Motor Speed Type: Multi Speed ECM
• Blower Motor Horsepower: 1/2 hp
• Power Voltage: 115 volts
• Power Phase: Single Phase
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 8.7 amps
• Max Overcurrent Protection: 15 amps
• Air Flow Rate High Heating: 1,221 ft³/min
• Temperature Rise Range High Fire: 20 to 50 degrees F
• Installation Configuration: Upflow/Horizontal
• Unit Type: Indoor Ducted
• Burner Type: Low NOx
• Heat Exchanger Type: Air Cooled
• Unit Width: 14 inches
• Unit Height: 33-3/8 inches
• Unit Depth: 28 inches
• Blower Diameter: 10 inches
• Blower Width: 6 inches
• Unit Weight: 90 pounds
• Country of Origin: United States
• Standard Parts Warranty - Residential: All Parts 5 Years; Heat Exchanger 20 Years
• Registered Parts Warranty - Residential: All Parts 10 Years; Heat Exchanger 20 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: am9s800603ax