Goodman advt961205dn 120000 Btu/h 96 Afue Gas Furnace

Product Description

The GOODMAN advt961205dn is a 96 AFUE, two-stage, variable-speed ECM gas furnace rated at 120,000 BTU/h high-fire input capacity. Designed for downflow and horizontal installations, it delivers efficient, quiet heating by modulating between a 120,000 BTU/h high-fire stage and an 84,000 BTU/h low-fire stage. The integrated variable-speed blower motor operates at up to 1,250 RPM and moves up to 2,130 cubic feet per minute of heated air. Licensed HVAC technicians install and commission this unit as part of a complete residential or light-commercial forced-air heating system.

This furnace is configured for downflow or horizontal installation, making it well-suited for closet, utility room, attic, or crawlspace applications where the airflow must discharge downward or laterally. With a nominal 5-ton cooling coil capacity, it is typically paired with a matched evaporator coil and condensing unit for year-round comfort. The communication-capable control board supports advanced system integration. Non-NOx burner design meets low-emissions requirements in applicable jurisdictions. The unit is intended for indoor installation only.

Key Features

• 96 AFUE rating reduces fuel consumption compared to standard-efficiency furnaces
• Two-stage gas valve with 120,000 BTU/h high fire and 84,000 BTU/h low fire for load-matched operation
• Variable-speed ECM blower motor at up to 1,250 RPM for quiet, efficient airflow
• Downflow and horizontal installation configurations supported
• Non-NOx burner design for low-emissions compliance
• Communication-capable control board for compatible system integration
• ANSI certified and ETL listed

Compatibility

Designed for use as a downflow or horizontal gas furnace in residential and light-commercial forced-air heating systems with a nominal 5-ton cooling capacity. No specific compatible model numbers were provided in the product data.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the National Fuel Gas Code (NFPA 54), and the manufacturer installation instructions. Disconnect and lock out all electrical power at the breaker before servicing. The unit requires a 115-volt, single-phase, 60 Hz power supply with a maximum overcurrent protection of 20 amps and a minimum circuit ampacity of 13.8 amps. Vent connections are available in 2-inch or 3-inch diameters; verify vent sizing against local code and the applicable venting tables before installation.

Technical Specifications

• AFUE: 96
• High-Fire Input Capacity: 120,000 BTU/h
• High-Fire Output Capacity: 115,320 BTU/h
• Low-Fire Input Capacity: 84,000 BTU/h
• Low-Fire Output Capacity: 80,724 BTU/h
• Cooling Capacity (Nominal): 60,000 BTU/h (5 tons)
• Gas Valve Type: Two Stage
• Motor Speed Type: Variable Speed ECM
• Blower Motor RPM: 1,250 RPM
• Blower Motor Horsepower: 1 metric hp
• Air Flow Rate High Fire: 2,130 ft3/min
• Air Flow Rate Low Fire: 1,500 ft3/min
• Blower Diameter: 11 inches
• Blower Width: 11 inches
• Number of Burners: 6
• Burner Type: Non-NOx
• Temperature Rise Range High Fire: 35-65 degrees F
• Temperature Rise Range Low Fire: 25-55 degrees F
• Power Voltage: 115 volts AC, Single Phase, 60 Hz
• Max Overcurrent Protection: 20 amps
• Min Circuit Amps: 13.8 amps
• Vent Diameter: 2 inches or 3 inches
• Installation Configuration: Downflow/Horizontal
• Unit Height: 34.5 inches
• Unit Width: 24.5 inches
• Unit Depth: 28.875 inches
• Unit Weight: 158 pounds
• External Static Pressure Rated: 0.5 inches W.C.
• Filter Quantity: 1
• Filter Size (Minimum): 20x25 inches
• Heat Exchanger Type: Gas
• Communication Feature: Yes
• ANSI Certified: Yes
• ETL Listed: Yes
• Unit Type: Indoor
• Registered Residential Parts Warranty: All Parts 10 Years; Heat Exchanger 20 Years (registered)
• Standard Residential Parts Warranty: All Parts 5 Years; Heat Exchanger 20 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: advt961205dn